WBS 20L query (carbatec, amac, etc)-blade binding during resaws
Hi all,
Ive been trying to restore the above to good working order; nearly there, but there are some ongoing niggles, and i have no manual to work from. If any members have a copy they could email, i would dearly love one..cant find one ANYWHERE.
So, brand new 3/4" blade, 4tpi, carbon steel. 3hp motor should be able to cope with 13-14" rimu resaw, but keeps binding badly. LOTS of heat generated on pulleys and belts. brand new belts. Drive belt from motor to tension pulley continues to spin during blade binds; secondary belt from tension pulley to band saw wheel is slipping badly, not moving at all (a B31 v belt). Ive checked and rechecked blade is square, blade tension is stable and very high, pulley alignment,etc, which are all good. Belt tension has been a problem, particularly on this secondary B31 belt, and i had to go buy a longer bolt to use maximum adjustment on tension pulley, to try to increase tension.
Makes me think that B31 belt is the wrong size (was a staight replacement for what was in there already). Can anyone advise what correct belt sizes for this machine are, or what else could be going wrong here?
Many thanks in advance.