1 Attachment(s)
How to make 'Pedestal' legs
Hi Guys,
Wondering how on earth to make 'Pedestal' legs - guessing that's what they are called.
Any advice on how I would create the ones in the image as an example would be very much appreciated.
Guessing they are made up of a few parts that are joined together?
Could I laminate up a bunch of boards to make the thickness?
Any pitfalls?
Thanks in advance!
Cam.
Attachment 314245
How to make 'Pedestal' legs
Here's a close up shot of one (of many) I made last year. The bottom piece is 200x140, the post is 200x200. There's normally a 200x70 top piece as well, but it was left out of this table to allow for the extension mechanism.
http://img.tapatalk.com/d/14/05/21/ta9egupe.jpg
Join it as a solid block, making it hollow will not end well. Nailing bits of small moulding on is also not advisable.
The fine detail at the top and bottom of the post is done with a router, the main curve is cut on the bandsaw and finished with spokeshaves and sanded.