Cat and Mouse

Attachment 345772

In the hope that the forum will continue, I am posting this simple toy automata. The idea is not original, only this version of it is. It can be made simpler by external actuators, unlike this one, which are both internal.
The pin wheels use furniture shelf pins from hardware stores, the body parts are 10mm mdf, cams are ply, and dowels for the cam followers and crankshaft. If members are interested in making it, I can post templates for the parts with photos and instructions for assembly, as a WIP.

Gus

Thanks Gus,
I think a WIP would be a great idea.

Quote:

---

Originally Posted by xpro

Attachment 345772

In the hope that the forum will continue, I am posting this simple toy automata. The idea is not original, only this version of it is. It can be made simpler by external actuators, unlike this one, which are both internal.
The pin wheels use furniture shelf pins from hardware stores, the body parts are 10mm mdf, cams are ply, and dowels for the cam followers and crankshaft. If members are interested in making it, I can post templates for the parts with photos and instructions for assembly, as a WIP.

Gus

---

Well Done Gus !!!

You are the Automata Guru (Could open the movie) :2tsup::2tsup:


Keith

Thanks very much for the comment Keith !
NCA, working on producing drawings and templates with build instructions, will post when completed. I hope you might be inspired to make one or two for the kids....
Gus<style id="pageBrightnessCustomCSS">body{zoom:135%!important;}</style>

That is one slick toy Gus....well done, sir..cheers, crowie

Nice.

Attachment 346583
The platform is the stage for all components. Material is your choice, I used 16mm ply.
Attachment 346587
The cat's body is 180mm long. Please check the printed size against this size, some printers reduce/enlarge automatically. Page is A4.
Attachment 346585

The photo is the internal layout. The active paw is moved by a small mdf arm, pivoting using 5mm dowel. It should be at rest position when paw is down. If making the cat with moving actuators internal, three cat bodies are needed. The center one is minus the ears. It is cut around the clearance needed to move the paw and tail. 9mm dowels are the cam followers. Length is determined by the distance from the cam to the parts by trial and error. You may want to move the tail less, or more than the one shown in the video. Thickness of the tail and the paw actuator needs to be sanded for clearance and smooth operation. Cams are glued to the camshaft at the corresponding distance to the drilled holes in the platform. The mouse is cut from 16mm mdf, sanded to shape. A wire attaches it to the dowel which is glued to the pin wheel. Glue some string for the tail.
Any questions, PM, post, or email.
Gus

I love your work Gus.

As I said previously - a GURU

Keith

I'm late to the party but still want to say thanks for showing this nice project.

Quote:

---

Originally Posted by htl

I'm late to the party but still want to say thanks for showing this nice project.

---

Thank You HTI ! I hope you might be inspired to make one,
Regards.
Gus