guys.
just got this and now time to clean up :)
Peter
guys.
just got this and now time to clean up :)
Peter
Not me Peter but wow, congratulations.
Phil
I saw it listed. I wondered who snapped it up. FP1 travels if I recall.
Nice.
Is it CNC?
If the CNC stuff is still functional, why convert it back to manual? ... it looks like the manual controls are still there.
Best of both worlds :)
I like it Peter. :2tsup:
Piers has an larger MH 700 - https://www.woodworkforums.com/showth...76
BT
Hi Peter,
I have an early 70's Maho MH700 manual machine.
See link below.https://www.woodworkforums.com/showthread.php?t=179937
Your MH400 looks like a toy in comparison to the bulk of the MH700. I have only recently got mine powered up after having it in storage. I have found the Maho it to be a very nice piece of Engineering and a pleasure to use.
What spindle taper does the MH400 use?
Cheers Piers
Hi Piers.
your is very nice and big . i wouldn't buy this MH400 if it big as your :)
my shed already full and i'm still finding the place for this Maho mill .
i think the taper spindle on this one is the NT40 but i haven't check it carefully yet to be sure.
cheers
Peter
Good score. I would love to have one.I would say that it would work as a manual machine as it has handwheels on it. It looks like it has a early heidenhein controller on it, maybe a TNC155. Does the DRO use glass scales or encoders on the screws?
Books have been written on that. However, in simple terms a mill uses a rotary cutter to remove material (typically metal) from a work piece. It has a table that can be positioned accurately that the work piece is secured to and that moves relative to the cutter to do the cutting. The head of a mill varies according to maker but has a spindle that the cutter mounts in that is driven by some means (direct drive, belts, gears etc). If you are familiar with a wood router, it performs a similar task.
Michael