Ahoy Elektra Beckum PK 250R owners! Any marks on your Scribing-Blade's Drive-Belt?

Hello Folks,

I'm trying to replace the missing drive-belt for the scribing-blade on my Elektra Beckum PK 250R table saw, and I'm hoping that one or more of you might have a similar machine, and will thus be able to tell me if you can see any identification marks on the outside of the said belt - either a Part No. or a specification perhaps(?)

I've scoured the Net for relevant spare parts diagrams and have unfortunately come up empty handed. Whilst not easy to find in any circumstance, there's nonetheless diagrams lurking away out there for the plain old PK 250 (which doesn't have a scribing-blade), and the PKR 250 (which has a scribing-blade, but spins it courtesy of an auxiliary motor). My model - the PK 250R - spins its scribing-blade via a v-belt that runs back to the spindle for the main blade. So there's only one motor, but it drives both blades.

Needless to say, a scanned copy of either the correct matching Parts Diagram or Owner's Manual would be cosmically brilliant. They often include the former at the rear of the latter, although part numbers can sometimes change from their original designations over the years.

Many Thanks in advance,
Batpig.

Hi Batpig

Did you ever get a reply from anyone regarding the belt for the scribe motor as i am chasing one as well

Mooseman60 you might do better sending the original poster a PM (private message). I'll cross my fingers for you. :2tsup:

If you can measure the distance between the centres of both pulleys as well as their diameters and the size of the V groove, an industrial belt supplier should be able to work out what you need.

Yes as per above. I've just bought PKR 250 off someone but it didn't come with the rip fence. If anyone knows of a manual or parts diagram for this saw that I could download it would be much appreciated. I've already done a pretty extensive search online to no avail.

Stewie