Jet JPT-310HH spare cutters
I've recently bitten the bullet on some equipment, and one item that has been recently delivered is a Jet 12" planer/thicknesser combo machine, the JPT 310HH: https://www.carbatec.com.au/machiner...th-spiral-head
I noticed that spare cutters for this machine are somewhat expensive ($160 per box of 10) compared to overseas sources. The original cutters here are: https://www.carbatec.com.au/blades/p...d-shelix-heads
I've done a bit of digging around, and in the US I can find a 10 pack for USD$65.00 from: https://parts.jettools.com/SearchResults.aspx?s=1791212
Those cutters I am pretty darn sure are going to work, as they're from Jet themselves (the US model JJP-12HH is the exact same unit, they call it a jointer/thicknesser and it's noted as being 12" instead of 310mm which is the same thing in a different measurement).
Further to that offer, I found the Byrd Tool store selling a pack for USD$35.00: Byrd Store
I wrote to the folks at Byrd, and was told "We only supply our cutter block to Powermatic, not Jet".
Interestingly, if you look at the Carbatec listing, the part is "Replacement Tungsten Knives to suit JET & Powermatic"
Has anyone any information, direct knowledge, thought or opinion on whether the Byrd Tool cutters will work in this machine? Any other thoughts or places/sources for spare cutters? I am not against paying a fair price locally, but USD$35.00 works out to less than AUD$42.00 - it's near enough 4 for the price of 1, and I find that a bit excessive ;)