New Bandsawn box WIP

Starting a new Bandsawn box made with a off cut from a Salmon Gum log.
1st I filled all the voids and checks with Casting resin.


https://uploads.tapatalk-cdn.com/201...83a06c098f.jpghttps://uploads.tapatalk-cdn.com/201...b6c3fa7553.jpghttps://uploads.tapatalk-cdn.com/201...4d3193a37c.jpg

Then I smoothed out the front face enough to get it onto the bandsaw for some trimming and levelled the bottom and cut the back off.

https://uploads.tapatalk-cdn.com/201...44aff5857d.jpg

Now busy finishing the front face before I cut the drawers out.
https://uploads.tapatalk-cdn.com/201...3358dd88a7.jpg

Sanded to 800 grit the top section is going to be trimmed down and reshaped
https://uploads.tapatalk-cdn.com/201...d757e8d88a.jpg

Marked out drawers, have to wait till Monday now for the bug bandsaw at the Men's shed. https://uploads.tapatalk-cdn.com/201...ab0a22136d.jpg

Nearly finished, just need to flock the inside of the drawers.
https://uploads.tapatalk-cdn.com/201...f20919d4d6.jpghttps://uploads.tapatalk-cdn.com/201...cbc3bfe5ae.jpghttps://uploads.tapatalk-cdn.com/201...c9c18e5c46.jpghttps://uploads.tapatalk-cdn.com/201...bd86d5e8c5.jpghttps://uploads.tapatalk-cdn.com/201...f9e30e7598.jpghttps://uploads.tapatalk-cdn.com/201...f098f4214c.jpghttps://uploads.tapatalk-cdn.com/201...66f9a7d58c.jpg

? Sorry I can't get the pictures the right way up.

Very nicely done. What is the finish you have used?

Quote:

---

Originally Posted by Treecycle

Very nicely done. What is the finish you have used?

---

It's Mirotone Semi Gloss Lacquer and then rubbing down with Restor a Finish and Ubeaut Traditional Wax.

Flocked the drawers today and it's done. Ready for delivery to South Africa. https://uploads.tapatalk-cdn.com/201...993b04d5ca.jpghttps://uploads.tapatalk-cdn.com/201...585f8171ff.jpg

A very nice bandsaw box you must be very pleased, The receiver will also be very pleased. john t.

One very nice piece of work!!!:2tsup::2tsup::2tsup:

Beautiful work!

Loved this piece! Thanks for taking the time to post the "in progress" photos. Do you remember what the outside measurements were? Approx. is fine....

Hi its really beautiful, admire your work. How many hours work did it take? What is the green material for the draw linings and do you just glue it in?