Hello, I am looking for some design ideas for a box that will hold a small cremation urn. Obviously I will not be able to tip the box upside down to screw the base on, as the urn will spill
Any ideas and suggestions would be gratefully received
Printable View
Hello, I am looking for some design ideas for a box that will hold a small cremation urn. Obviously I will not be able to tip the box upside down to screw the base on, as the urn will spill
Any ideas and suggestions would be gratefully received
For my FIL's ashes I made a Sheoak box so that the ashes were inserted from underneath with a slide in bottom.Quote:
Originally Posted by Dengue
The edge of the slide in bottom is a strip of Banksia from FIL's shed
Attachment 445163
Attachment 445164
His ashes are buried at a small country cemetery along side some of the first relatives that came to WA with the first whites in 1892.
A nearby geographical name is a place call The Sheoaks.
The ones I've made allow the clients to put in the ashes, then seal the urn. The lid panel slides in from the end, then a piece of beading is glued in place to hold the panel.
Attachment 445172
Here is one I made earflier
https://www.woodworkforums.com/f87/bo...14#post1959514