Printable View
I am having an issue assembling my Triton MK3. The tabletop is too short for the frame and only fits one pair of holes - if I attach one side the other comes loose. I can't find a way top lengthen the tabletop, narrow the frame or move the mounting screws. Can anyone help?
Image album:
https://imgur.com/a/45udo2A
All is correct. You need to push the locking pins in and rotate by 90 degrees.
There is a lug on the side of the pins that fills the gap.
That’s the way it’s supposed to be.
Do this:
Push the table top hard against the built in knobs on one end. The table top should locate into these pins.
Next, turn the L shaped locking bars horizontal. These L shaped bars will have little tabs that stand out from the round bar rod, like little wings. When these L brackets are horizontal, the wings will line up with slots in the end plate. Push them thru as far as they’ll go, then the ends of the L bracket lock into the holes in the table top. When this is done, turn the L brackets down so they line up vertical, pointing down. This will lock everything up
Sent from my iPhone using Tapatalk
Silly me! :redface:
Thanks guys