Printable View
Hi all,
just inherited a durden junior joiner
its in mint condition but the saw blade was missing
I tried a blade from the local hardware store but the kerf ?
is not enough for the roving blade ?
does anyone know where i can purchase the correct blade
cheers Rob
Try a specialist saw service. They will also have a better range of adaptor rings to suit the abort size - or can enlarge the hole in the blade if too small.
if in Brisbane I would suggest Brisbane Saw Service.
As said above saw sharpening service take the "riving knife" with you
Welcome to the forum Rob.
Ross
Hey Team, any updates? My Junior Joiner has a 3/4" arbor for its 8-8.25" blade and I'm dammed if I can find a suitable replacement. Thanks heaps.
John I think you will probably need to go to a saw doctor/ sharpening service to get a blade.
Hi Jon, I got some bushes from aimsindustrial.com.au that let you fit a 210mm blade with a 25mm bore to the junior joiners 3/4" shaft.Quote:
Originally Posted by jonhurn
Austsaw 25 - 19.05mm Saw Blade Bush - Twin Pack 2/Pack - AUSTSAW