Teknatool TL 1000 8s looking for parts / info
Hi everybody,
my name is Gorm, a wood turning beginner in Brisbane.
Got a 1984 Teknatool recently, dont know all that much about it yet.
Bearings would run HOT, even after 2 minutes of running,
hence got a friend to use his press and push out the spindle
so that the bearings can be replaced.
Now that spindle has a 1 inch / 14 TPI UNC thread, which is different from
the previous lathe I used (8 TPI) and for which I had some adapters made up
(polishing wheel, wire brush wheel, chuck etc)
If possible, I would like to continue using those adapters
Just a shot in the dark: are there spindles with different threads
to be had somewhere ?
(I heard, that Teknatool built their machines in various versions,
do they all all have the 14 TPI spindle or are there different ones ?)
Does anybody have knowledge about the model history here ?
Also, the machine I got, is missing the outboard turning toolrest,
does anybody see a chance of finding one ?
Would generally be interested in any info re said machine,
got the manual for it, thanks to some members here in the forum.
Would appreciate any info
or possibly a contact to ask the odd question,
SMS 0415 775 184
thanx
Gorm