Cannot undo blade on tablesaw
Hello all,
I have a Carbatec 10HB tablesaw, bought new many years ago. After a lot of use, it is now starting to play up for the first time.
The nut with the left hand thread on the arbor and which is screwed against the beleville washer which presses against the blade will not come undone. It is jammed tight against the washer which is now flattened.
With the blade wedged in position with a piece of timber, turning the nut with a long handled spanner makes the whole arbor turn without moving the blade.
Can anyone please tell me how to fix this so that I can change the blade?