8 Attachment(s)
Table Saw Blades 10" and Dado 8" bits (Sawstop)
These blades won't fit my new saw, so have to be sold.
I did a considerable amount of research before buying a set of blades that covered all the work I planned to do on my Sawstop. They are all in excellent condition, never sharpened and still razor sharp. Amana Tool blades below were in a Stumpy Nubs Shootout with Sawstop and Freud.
5/8 arbour; 10" blades; Carbide. Links to Amana tools below; Approx AU$ price ex shipping in brackets (I bought direct from the States)
Collect from Newcastle NSW, or I can post at buyers' expense.
Amana tool:
40 tooth, general purpose: PR1040C Electro-Blu™ Carbide Tipped Prestige General Purpose 10 Inch Dia 40T ATB, 18 Deg, 5/8 Bore, Non-Stick Coated ($140)
Attachment 473743 $100
80 Tooth fine cut: 610800C Electro-Blu™ Carbide Tipped Trim 10 Inch Dia x 80T ATB, 10 Deg, 5/8 Bore, Non-Stick Coated ($195)
Attachment 473744 $150
Flat Grind Blade - this is a rip blade, but I bought it for the flat ground teeth so suitable for box-making, finger joints, rabbets, dado's etc. It cuts beautifully. Used for a couple of test cuts and then sat crying in the corner as I haven't made any boxes or finger joints, and the few dados I've made have been done with the Freud below. Advantage for a sawstop owner is you can use it with the standard brake, so no need for a $165 dado cartridge:
610240 Carbide Tipped Ripping Standard 10 Inch Dia x 24T FT, 20 Deg, 5/8 Bore ($195)
Attachment 473745 $150
Sawstop Freud Dado Kit:
I'd prefer to sell this as a set, but will consider separating if there's interest in the individual bits. Consists of:
- Sawstop 8" Dado Brake Cartridge ($165)
- Sawstop Dado zero clearance insert ($80)
- Freud SD608 8" Dial-a-Width dado stack (around $500 delivered, if you can get it here!)
The dial-a-width blade is brilliant, and I'm gutted I can't have it adapted for the K3. Set up the stack according the chart, make a test cut, and then adjust the width with a simple dial - 0.004 inch or 0.1mm increments, so incredibly accurate, and no mucking about with shims. It's so simple! Comes with a setup chart, booklet and DVD with tips and plans to make some jigs.
New for all of the above = $745. I'd like $550 for the lot
Attachment 473746. Attachment 473747 Attachment 473748 Attachment 473749 Attachment 473750