Interesting old desk

Another old desk has been dragged from the shed.
This will need a bit of love.

I first thought it was all Australian Cedar, but on closer inspection it seems to be Kauri Pine. The front apron and drawer are definitely Cedar.
The drawer would have had a screw type pine knob, which I have some of, but I may turn a Cedar knob with a dowel and glue it in.
It has a thick brown/red stain (original) that I don't plan to try and rejuvenate.

Attachment 477086Attachment 477087Attachment 477088

This is the desk now.

Attachment 477089

I normally try and install the original hardware, but I think I may have to replace a couple of screws for the top :)

Attachment 477090

Here's an example after a test clean. I'm thinking that I won't re-stain, but instead fully clean and polish.
I like the warm golden old pine look.
It still has a lot of stain in it, but I can live with that as long as it's fairly even.

Attachment 477091

I'll post some more pics when I get some more done.

Very envious :)

Drawer has put back together and the front apron has been repaired.
I'll melt some coloured wax into the crack voids.

Tip: Don't try and clean this type of leg without a lathe :)
Steel wool and metho to clean off the gunk and polished with shellac.
I've left the top of the leg bare. I'll polish it when the table frame is together.

Attachment 477294Attachment 477295

A Few hours were spent cleaning the parts on the weekend.
The less fun part of restoration.

A few more pics.

Floating Cedar tenons added to back of the front face.
One of the original tenons was cut off to take the desk apart, and the other broke in half when tapped out.

Attachment 477633Attachment 477634

The drawer runners were replaced with Kauri.
I used the original guides and nails.

Attachment 477635

The front and back sections are now glued up.

Attachment 477637Attachment 477636

It should look more like a desk next weekend :U

Love the pictures showing the progress. Feel good I'm not the only one reusing the original nails :)

Quote:

---

Originally Posted by Blackout

Love the pictures showing the progress. Feel good I'm not the only one reusing the original nails :)

---

I always try and replace original nails/screws.

I would have loved to have kept heaps of hand cut nails and even hand filed screws that I have found in the past.
It just doesn't feel right. They go back into the furniture.

Probably some kinda pine - not thinking red cedar.

Quote:

---

Originally Posted by wood spirit

Probably some kinda pine - not thinking red cedar.

---

Yep.
It's pine all right. I think it's Kauri Pine with a Red Cedar front and drawer.

A few more pics.

The table frame is now together.

Attachment 478158

I turned a Cedar knob for the drawer.

Attachment 478159Attachment 478160

Fitted the case runners and tweaked the drawer runners.
I like a 5 1/4 size plane for this.

Attachment 478161Attachment 478162

I think I'm going to add kickers for the drawer. It's very floppy when pulled out and I'm sure it contributed to the damage at the bottom of the front face.
Since there's no real meat to add them to the frame (at the front), I may just screw kickers to the underside of the top.

Here's where I'm up to now.
Polishing the frame.
Next job is cleaning, adding and polishing the top.

Attachment 478163

Some work on the top on the weekend.

Before cleaning ...

Attachment 478934

After.

Attachment 478935

I added the drawer kickers under the top. They are just screwed in and some shellac has been applied.
I also plugged up some of the nastier screw holes to prepare for attaching the top.

Attachment 478936

Put some music on and filled all the nail holes around the edge of the top with coloured wax.
Took about 1/2 an hour.

Attachment 478937

This is after a couple of coats of neat shellac (brushed on).
Still plenty of age and character. No sanding.

Attachment 478938Attachment 478939

Next is to attach the top, and complete polishing. I'll give this a good build and shine (more music required :U).
I'll glue the knob into the drawer, give the whole thing a wax and call it done.

Next up , the finished pics.

Cheers all,
Stu

The last piece of the puzzle.
Glued the knob in (after polishing).

Attachment 480018

And we're done!

Attachment 480019Attachment 480020Attachment 480021

Whilst I quite like this little desk, I don't know if I have room in the house. We already have 3 Cedar writing desks scattered around.
I'll probably have to sell this as well. This project was just for fun.

Thanks for looking all.

Cheers,
Stu

A great project, perfect for winter. I'm pleased to see the old glue pot. I still use mine but have become a bit lazy when I fix small pieces of veneer I use the liquid hide glue unless I have the glue pot simmering in the corner for a larger project.
Cheers

David