4 Attachment(s)
WADKIN BGY Disk & Belt Sander
I bought this WADKIN BGY Disk & Belt Sander earlier this year in May from a forum member (clear_out). The plan was he would bring it up on the back of he's ute when he came to visit family and friends. COVID obviously delayed things but last weekend I finally took possession of this big heavy duty unit. Fortunately we were able to lift it off using only an engine crane so didn't take too long.
I've always wanted a machine like this as any sanding has been via a hand held belt sander which gets long in the tooth and is inaccurate. It'll be particularly good to shape the profiles for wooden surfboard fins like I have done for this board: Dorff Boards: 6'2" Plankish Whale - Compsand
Attachment 486436 Attachment 486437
I made up a mobile base for it this week with heavy duty castors. The base is 45mm thick and uses 4 x biscuit joints per join and glued together with Titebond 3 glue. The machine is about 350kg so should be plenty strong enough. The extra height the base provides is good for me as I am 6'1". I'll add a little lip around the base incase it wants to move when I push it around the workshop.
Attachment 486439 Attachment 486438
Not a PK saw or a RS lathe but worthy of a restore at some point. I intend to:
- Strip it back
- Bog up any imperfections
- Respray it
- Convert it to a 3hp single phase motor unless I have 3-Phase installed in the next place I move to
Thanks again Henry for bringing it 1000 klms - your an absolute legend!