This is based on the plans out of 'Woodworking Magazine' , 'Thos Moser's Measured Shop Drawings' with a few variations of my own. I lapped the front rails, offset the tenons on aprons closer to the outside and cut full mortises. This is really the prototype. The top has a central panel of red cedar and the draw sides and base are Caloon(Brown Quandong). Made this for my own amusement so the whole thing was done by hand - flattening stock, thicknessing, mortises etcetera. (Not skiting just trying to demonstrate that with time and patience these results are possible, heh I trained as a vet)