During my move some machines suffered a bit of damage.
The Fasco wiring box took a hit.
There are two wires diisconnected. Brown and Blue in the pic.
Is anyone willing to suggest which pin they should be connected to?
Cheers
Printable View
During my move some machines suffered a bit of damage.
The Fasco wiring box took a hit.
There are two wires diisconnected. Brown and Blue in the pic.
Is anyone willing to suggest which pin they should be connected to?
Cheers
Yes the pins the electrician connects them to. :U
DISCLAIMER
No liability is accepted by U-Beaut or the Wood Working Forum's administrators
or moderators for advice offered by members posting replies
or asking questions regarding electrical work.
We strongly advise contacting a Licensed Tradesperson for all electrical work.WARNING
Information supplied within posts is not to be considered as detailed formal instructions to complete a task.
Members following such information do so at their own risk
Likely cause is the cable clamp did not anchor the cable well enough. Need to fix that first or it will happen again.
Sorry cannot help with where to reattach. Would only be guessing.
Standard wiring colour coding is red and brown are respectively the old and new colours for active, black and blue are the equivalents for neutral.
Attachment 494494
Hi Scally,
Brown goes onto the middle terminal with the white wire, Blue goes onto the right hand side with the orange, mauve and black.
Make sure that reset button is still ok. Looks a bit dodgy.
Information supplied within this thread is not to be considered as detailed formal instructions to complete the task.
Following such information is done at your own risk.