Printable View
So going through all my stuff, which at the moment seems endless, I've come across these.
They are definitely cedaresque in density, I'm not familiar with that face grain. There is a bit of colour variation and the face grain is tighter in some places.
Wadjarecon?
Attachment 511370 Attachment 511371 Attachment 511373 Attachment 511372
My guess would be Western Red Cedar or California Redwood.
Thanks for the input. Interesting. I suppose I can see some sense of smlilarity, however, if you were standing where I am you'd be like ....... yeah?....nah.. Yeah?.... Naaahhhh. Yeah?
This pic makes them look far more similar than they appear to the eye.
Attachment 511377
I'd say aldav is spot on..
Quick test would be to saw or plane a piece and if it gives off the classic WRC smell then so be it.
My money however is on Cali Redwood.
I might run a bit under the drumsander, ahem, which is for sale, ahem, without the dust extractor on. That part should be easy as I sold the dust extractor yesterday.
Western Red Cedar
I dunno what you blokes are seeing, but the piece on the left is almost certainly a hardwood - softwoods don't have that pore structure. It looks an awful lot like a Toona to me. The one on the right is clearly a softwood, whether it's WRC or CR would be pretty hard to say from a pic. No need to fill your shed with sander dust, a few swipes with a hand plane usually releases enough odour from any of those woods to give you a good sniff....
Cheers,
Here are a couple of other photos. FWIW, the cut board weighs in at around 400kg/m³, I can't quite measure the waning slab as the only scales I have are for food and they only go up to 5kg, anecdotally it weighs not much more than that looking at when the scales go into overload.
Attachment 511513 Attachment 511514
The slab smells like RC the other has no appreciable smell that I could detect, so some sort of non-ferrous wood then.