1 Attachment(s)
Nail Kicker (Pneumatic nail puncher/remover)
Reconnx Nail Kicker with 4mm and 6mm drivers, and spare parts kit.
Attachment 513260
THIS THING IS BRUTAL!
I purchased this directly from the USA manufacturer a while back when I had thousand of nails to remove from pallets of flooring. It was Cypress boards on Norf Coast Hardwood Joists that were 60 years old. The joists were/are as hard as anything, which makes nail removal a very difficult task.
Not for this brute of a thing though! It got the job done sharpish. When I first tested it (in the shed) I had a piece of timber angled towards the sheet metal stand of the bench. "Phutt–DING" was confirmation that it had blown the nail clean out. Sometimes it may require 2-3 shots, just depending on the timber and the nail.
It probably has about 15-20 hours use on the clock, I suppose. The Custom Pry Bar has a wee bit of superficial surface rust which can be sanded off if required.
You can set the punch depth to either 2.5mm, 10.4mm or 22mm.
New price is USD319 + USD90 for the extra driver, and USD15 for the parts kit, which is a total of USD424, plus an arm and half a leg for freight to Oz. On Amazon.au they are AUD755 with all 4 drivers, and on Amazon.com they are USD460 with 3 drivers, delivered, which is around AUD680.
Price: $450 plus postage. The package in the pic weighs 2.884kg, so with some bubble wrap it should still sneak under 3kgs. I think it will fit in a large Post bag, and they are a little over $20 (?).
As usual, first to say "I'll take it" will be the buyer.