Search:

I am looking for the 'infeed chute' of a T.Hancock (Ipswich Qld.) Corn Sheller. Any pics would be helpful, please.

G'day Guys,
A couple of guys at The Shed are asking for plans to make a Pull-along wooden Walking Ox.
I have looked on the net, but could ...

Thank you riverbuild. It is obvious, now, that I need to take your advice, and that of other woodies.

Thank you rusty nail. I will adhere to your suggestions.

Thank you auscab. Yes it is as pictured, yes I'm using paper which is too fine, after reading all replies my Dust Extractor is probably inadequate. I will also go back to using/trying both drums, but...

I have just posted a thread indicating the same problem, with a twin drum Carbatec. If I find a solution I will post it.

I have a Carbatec Drum Sander, about 10 years old, twin 'drums' 125 mm diam., but I only use the front one. Problem being the drum, the sandpaper, and the job, all get overheated due to the sandpaper...

Dear Sir/ Madam,
I have very limited experience at The Forum. If I have done something unacceptable, please explain the correct methods, and I will do things in the...

Knock-out Bar required to remove M2 from Tailstock, on this lathe.

Thank you Bowl Turner, I appreciate your help.

Does the Live Centre on the Tailstock "knock-out" as on other lathes. This lathe has not been used for a long time. Is there a Morse Taper within the Tailstock? Maybe it is seized?

John,
"Sketch-up Make" is good, there is plenty to learn, and you will . Get some help if you can, you'll get to be where you want to be, sooner! Ross

Bandsaw "Sander". Picked up a 2nd hand 14" band saw, removed blade & guides, fitted a strip of sandpaper about 40mm wide. Have a "sanding belt" made, probably 150mm wide, the length of band saw...

Col, Like the pens, would you tell me the name of the "kit" used in the Macadamia-cross cut pen, please. Regards, Ross-the plumber

Thank you Crowie, I appreciate your help............... the plumber

Morning All,
As the title says you are reading about a 1947 model plumber, no longer plumbing, with a strong interest in timber and what can be done with it. I'm sure I am going...