Search:

Thanks for the tips.

The slab some a water stain which will need to be taken out via sanding or planing. I was going to cut the slab to size with my plunge saw.

There is slight splitting on...

I have a slab of Tallowwood. I'm due to cut it down on three sides (4th natural curve) to make a table top for a Singer treadle.

Having never worked with a timber slab, what pointers do I need to...

Cheers for the helpful reviews lads, if they fit but with too much play, then I'll go Festool. Thanks.

Genuine question, what does the rail offer over the Triton rail for instance?

I have a Festool plunge saw but as yet no rail. From reading numerous reviews, many saws share the same rails. Is there a requirement to run the Festool saw on the Festool rail, or will any rail run...

A torsion box was an idea. Setting the frame slightly in from the extremities, and then cutting plywood down to create the plywood effect down the side. 6mm ply would sound hollow you are correct. I...

Thanks for the advice guys. I could add a 4th element to the table (legs x2 and top) as a removal brace bar. A straight bit of timber should be able to find a home.
There's no room for it to...

I plan to make a plywood table top. I was to use 19mm ply cut to 1500x900 for the top. Then to rip the rest of the sheet up to run supports underneath and around the edge so that it looks like a 38mm...

I'll check these out guys, thanks.

What are my options for treating a plywood table top? Mostly indoor use, but might be used outdoors on occasion, but hopefully not left to the elements. It'll be a raw ply that I'll be applying this...

Thanks for the review chap. Have you bought any other saws to go along side or are you still using this solely?

$560 is a price I've found it for.

I await your views. I've had a few words from another forum member and they're happy with theirs, but it's always good to hear other opinions.

Hi there.

There's not much said about this saw on the net, but I have noticed the odd mention of it within the pages of this forum, so I thought I'd ask to see if anyone had any hands on...