Search:

I would test insulation resistance on your saw and hard wiring and if ok check the rcd trip times and sensitivity and if ok try a d type breaker
Cheers matt

Sent from my HUAWEI TAG-L22 using...

A surge protector Will not work for a increase in amperage for a short period of time. A multi plug board trip is rated a t 10amps for overcurrent only

Sent from my HUAWEI TAG-L22 using Tapatalk

Hi Dave I was referring to the first post where Baz asked if the 20amp breaker should be larger.

What is this current limiter at the plug. I haven't seen these
Cheers matt

Sent from my HUAWEI...

I was referring to the first post when Boaz said the breaker was 20amp (should it be more)
Dave what are these current limiter on the plug. I've never seen them.
If I was cautioning I'd check...

Hi Dave what is this current limiter on the plug. I haven't seen these

Sent from my HUAWEI TAG-L22 using Tapatalk

I'd call a sparky as he Will have the meters to check insulation of your saw ,hard wiring an also trip times and sensitivity of your rcd to rule out nuisance tripping
Cheers matt

Sent from my...

Call a sparky as he Will have the meters to test insulation on your saw ,hard wiring and also test the trip times and sensitivity of your rcd to rule out nuisance tripping.
Cheers Matt

Sent from...

Sent from my HUAWEI TAG-L22 using Tapatalk

Hi baz, don't up the size of your breaker as the the cable run Will be rated at 20amps depending on how it was installed

Sent from my HUAWEI TAG-L22 using Tapatalk

Sent from my HUAWEI TAG-L22 using Tapatalk

Hi Baz, don't increase the amperage of your breaker because the cable run for that circuit Will be rated at 20amp depending on how it was installed so increasing the rating Will not cause it to trip...

T

Sent from my HUAWEI TAG-L22 using Tapatalk

Hi Boaz, don't increase the size of breaker cause the 2.5mm cable run for this circuit is only rated at 20amps depending on how it was run. Could be a number of things but I'd suggest getting your...

Hi Baz, don't upgrade the breaker as the 2.5mm cable run for this circuit is rated at 20amp depending on the condition s of how the cable was run and upping the breaker Will allow the fault current...