Search:

Thank you so very very much, Chief! I was pulling at the top of the lever. Doh!

Hello!

My height adjustment lever won't lock my TSA001 flat to the baseplate. It's attached to a Workcentre 2000.The position where it locks securely gives me just enough blade height to cut 19mm...

SUCCESS! I'M SHOUTING MYSELF A BEER! I was too focussed on the legs and bearers. I forced the issue by trying to assemble the bearing channel correctly - after I had loosened all the other bolts -...

Thanks for the many tips. Just got back from holidays so I'm cranking up the assembly effort again on the weekend. On inspection, it doesnt seem as square as it should be so hopefully some oushing...

Hi Hugh,
The bearing channels snap into the top of the workcentre; then, as you say, the holes should be aligned to pop in the bolts. Mine are 930mm long and they need to span a gap of 950 (give or...

Offer them a VB and you'll almost certainly get a response. Offer them a real beer and you'll be inundated with offers of help :D[/QUOTE]

Hey, I like VB. But I think you are right - there's a...

Thanks for all the links and comments. I have taken three pictures of my most recent attempt at assembly based on these; but still no luck.
From what I can tell the legs can only be bolted on two...

Dismantled the thing to no effect. Alas, can't get seem to bridge that 2cm to snap the silver bearing channel into place. Will call Triton to see if they have a Victorian service agent.

Thanks Eddie,
A job for tomorrow :-)
Cheers
Michael

Hi!
Purchased a discounted Triton 2000 at Masters last year and have only gotten around to assembling it last week. My mug D-I-Yourselfer spirits were high!

Alas, a problem - the base channels...