Search:

Hi, Is there anyone out there set up to sharpen rip and cross cut tenon saws. I can sharpen a saw but I'd like to get them sharpened perfectly and start from there.

Thanks in advance

Thank you for your input to this issue. I have taken up Timbercon's offer to swap it out.

Mouth is square. Blade is square.

If the centring hole was off centre then it would only result in the lateral adjuster having to be to one side for the blade to be straight and get a full shaving setting. This plane requires the...

Yeah. I'm thinking the that the base the blade sits on is not square to the base.

The photo shows the adjuster fully to the right to obtain that central scroll. The mouth plate does not "square" the blade. The blade is square as per an engineering square.

472261472262472264

Any comments gratefully listened to. Note lateral adjuster at full tilt to cut in the centre. Many times I don't get a full with cut with that full tilt to the right adjustment.

I rang them and they were very helpful. We haven't quite pinned down what the problem is. They have offered to take it back, but I just want it to work so we have agreed that I'll try to work out...

The cutting edge is square. Gave the blade a lite touch on the stones is a sharpening jig and the polish was flat across the blade. Also, the blade only cuts full width when its lateral adjustment...

Hi,
I got a Luban Low Angel Jack Plane. Unwrapped it, got all the preserving oil off it. I gave the blade the tiniest of a micro bevel at 30 degrees. I went to set up the blade and found it was...

Thank you. I'll chase that up.

Does anyone make quality blades for the Stanley No. 10 1/2 plane.

Very new to this.

Thanks in advance