Search:
Type: Posts; User: Camelot
Search: Search took 0.01 seconds; generated 50 minute(s) ago.
-
28th April 2024, 09:07 PM
Thread: Shellac Over Pummice & Wax???
by Camelot- Replies
- 19
- Views
- 190
For me the use of pumice was only to fill the...
For me the use of pumice was only to fill the grain once you were happy that had been achieved you would continue just adding more coats of shellac to build up a body, the bodying process gives the...
-
28th April 2024, 12:31 PM
Thread: Shellac Over Pummice & Wax???
by Camelot- Replies
- 19
- Views
- 190
In the UK French Polishing and other more modern...
In the UK French Polishing and other more modern finishes formed part of the Cabinet Makers City & Guilds qualification back in the 1970's/80's (not sure about today) so we were taught to use fine...
-
24th April 2024, 08:53 PM
- Replies
- 4
- Views
- 110
Is this board from another property? they will...
Is this board from another property? they will have balanced the 3 phases
-
24th April 2024, 08:03 PM
- Replies
- 4
- Views
- 110
That's an old board, someone seems to have cut...
That's an old board, someone seems to have cut the panel to add a new RCD and done a poor job of the cut out with them sticking loads of blue tape around it.
It looks like that board is already... -
24th April 2024, 11:38 AM
- Replies
- 43
- Views
- 1,043
Yes I was thinking of how that would work, I...
Yes I was thinking of how that would work, I think a hollow lever with the other one inside and Wadkin probably changed the design to make the hollow one more robust.
-
24th April 2024, 11:32 AM
- Replies
- 43
- Views
- 1,043
Hi Rob, Yes the later clamps were angled down,...
Hi Rob,
Yes the later clamps were angled down, so Wadkin were definitely looking to address the movement of stock, I have attached a couple of pics from later ME's the first is from another ME... -
24th April 2024, 10:14 AM
- Replies
- 43
- Views
- 1,043
Hi Vann, Thank you for the pic's, they confirm...
Hi Vann,
Thank you for the pic's, they confirm what I thought about the single shaft for the lever pull downs on the earlier ME's, the other interesting thing about the pull down levers on this ME... -
23rd April 2024, 08:32 PM
- Replies
- 43
- Views
- 1,043
ME from 1928 Catalogue
Found this ME illustration from a 1928 Catalogue, still single shaft, but look at the direct drive motor configuration.
537571 -
23rd April 2024, 08:28 PM
- Replies
- 43
- Views
- 1,043
I wasn't sure about those because they didn't...
I wasn't sure about those because they didn't look very wide, but the shape of the bottom of the casting looks right with the bolt down floor lugs
-
23rd April 2024, 08:01 PM
- Replies
- 43
- Views
- 1,043
Wadkin Erecting Shop 1924
Looking at this picture from 1924 there seems to be 6 Wadkin Single Shafts ME's sitting in a row, I think they were cast in batches of 6, it looks like they have some of there wheels fitted.
537569 -
23rd April 2024, 06:34 PM
Thread: is this legal? taped wire only and live?
by Camelot- Replies
- 18
- Views
- 308
There is a Neutral busbar at the top right but...
There is a Neutral busbar at the top right but it's not being used because you have individual RCBO fitted.
There aren't many videos showing Australian boards, here's one with 2 RCD's with 3... -
23rd April 2024, 05:57 PM
Thread: is this legal? taped wire only and live?
by Camelot- Replies
- 18
- Views
- 308
A RCD can have a number of breakers (circuits)...
A RCD can have a number of breakers (circuits) with a common natural busbar, if the consumer board has 2 RCD's then each RCD will need it's own common busbar, you can not share one busbar between 2...
-
22nd April 2024, 06:32 PM
Thread: is this legal? taped wire only and live?
by Camelot- Replies
- 18
- Views
- 308
Yes true, there would need to be some load on the...
Yes true, there would need to be some load on the consumer board, so turn on a few lights and or appliances, before touching neutral and earth to trip the RCD.
This video demonstrates what I... -
22nd April 2024, 04:43 PM
- Replies
- 43
- Views
- 1,043
Hi Vann, Looking at your list of Test Numbers...
Hi Vann,
Looking at your list of Test Numbers I see a ME 239 Test 2085 that lives in NZ, do you know the owner of that ME or do you have pic's of it, because if I am correct it should be a single... -
22nd April 2024, 04:28 PM
Thread: is this legal? taped wire only and live?
by Camelot- Replies
- 18
- Views
- 308
Without a tester if there is a RCD breaker at the...
Without a tester if there is a RCD breaker at the board just touch neutral and earth to trip the circuit
-
22nd April 2024, 03:52 PM
Thread: is this legal? taped wire only and live?
by Camelot- Replies
- 18
- Views
- 308
Is that a fan or just a light fitting? the wiring...
Is that a fan or just a light fitting? the wiring looks like it's part of a daisy chain feeding a number of light fittings.
A ceiling fan would only need a twin & earth single cable unless there... -
22nd April 2024, 12:22 PM
- Replies
- 43
- Views
- 1,043
I have just noticed something about the ME Rob...
I have just noticed something about the ME Rob posted, it does only have one shaft for the pull down chain & chisel levers, just like what is shown in the 1924 catalogue, so Wadkin changed their...
-
22nd April 2024, 09:53 AM
- Replies
- 43
- Views
- 1,043
I think you should do the confusing backwards...
I think you should do the confusing backwards direction first where the machines are more interesting although you may not get many new Tags being offered due to commercial Woodworking Shop's...
-
21st April 2024, 07:17 PM
Thread: Wadkin PK Gen 4
by Camelot- Replies
- 103
- Views
- 6,504
Can't you take the cover off where the grease...
Can't you take the cover off where the grease nipple is and have a look inside, the grease may have dried over the years so you could rest that end in solvent and remove the old grease then reapply...
-
20th April 2024, 07:50 PM
- Replies
- 43
- Views
- 1,043
[QUOTE=ab1;2332696] Looking at the list of...
Looking at the list of Test Numbers your ME is already listed, but unlike later years there isn't a defined start and end Test Number at the beginning or end of a year to give a clue which year yours...
-
20th April 2024, 01:26 PM
- Replies
- 5
- Views
- 316
So you sanded back your old finish and found a...
So you sanded back your old finish and found a nice coloured raw wood which you wood like to keep, but unfortunately any finish will darken raw wood.
I use CUTEK because it's an oil based product... -
20th April 2024, 12:31 PM
- Replies
- 28
- Views
- 957
It's good the substrate was plywood and not MDF...
It's good the substrate was plywood and not MDF like we see these days, it would have swelled and never gone back to it's original thickness/shape, great job on matching the veneers and your...
-
20th April 2024, 10:52 AM
- Replies
- 43
- Views
- 1,043
Hi Andy, It's the Test Number we need to date...
Hi Andy,
It's the Test Number we need to date your ME, Wadkin used a pre printed book of numbers and the number from the page where they Tested the machine was recorded on the TAG
Here's an... -
20th April 2024, 10:45 AM
- Replies
- 43
- Views
- 1,043
Does your contact have Test Record books going...
Does your contact have Test Record books going back to the 1920 like he had for my 1954 EX?
-
19th April 2024, 12:04 PM
- Replies
- 43
- Views
- 1,043
Thanks, not sure why some Copy & Paste work while...
Thanks, not sure why some Copy & Paste work while others don't.
I corrected the year to 1928 -
19th April 2024, 10:45 AM
- Replies
- 43
- Views
- 1,043
Sorry, I just did a copy & paste and on my pc the...
Sorry, I just did a copy & paste and on my pc the pics looked great, I didn't realize no one else could see them, that's a shame because I thought it was a quick way of getting big pic's posted.
... -
18th April 2024, 05:10 PM
- Replies
- 43
- Views
- 1,043
Sorry Vann this is in OZ not NZ
Sorry Vann this is in OZ not NZ
-
18th April 2024, 09:47 AM
- Replies
- 43
- Views
- 1,043
Tag for FB ME
The seller of the ME on FB, found the TAG it was is it's correct location based on the other ME's we have pictures of
... -
17th April 2024, 02:13 PM
- Replies
- 43
- Views
- 1,043
Vann, Looking at your list you don't seem to...
Vann,
Looking at your list you don't seem to have this Tag
537305
And it lives in NZ -
17th April 2024, 02:10 PM
- Replies
- 43
- Views
- 1,043
The seller sent me a pic of the electric motor...
The seller sent me a pic of the electric motor Tag, so I went back to them to see if they could find where the Wadkin Tag might have been, Andy's ME Tag is in the same position as the one I posted,...
-
17th April 2024, 12:17 PM
- Replies
- 43
- Views
- 1,043
https://www.woodworkforums.com/attachment.php?atta...
https://www.woodworkforums.com/attachment.php?attachmentid=537235&d=1713134980
Looking at this pic Rob posted the pull down levers are small compared to what's on the actual ME machines, artistic... -
17th April 2024, 11:56 AM
- Replies
- 43
- Views
- 1,043
Another ME for sale on FB
登录 Facebook
537304
Vann, This is a pic of the Tag, it's on your list but this one must be an identical twin because the one on your list lives in the UK :) -
16th April 2024, 07:36 PM
- Replies
- 43
- Views
- 1,043
Your Red arrow points to the raised Wadkin...
Your Red arrow points to the raised Wadkin lettering, the below pic shows what I mean
https://www.woodworkforums.com/attachment.php?attachmentid=380675&d=1463653926 -
16th April 2024, 10:20 AM
Thread: English made Stanley-Bailey Planes
by Camelot- Replies
- 54
- Views
- 56,412
Pic you requested 537284 The guy I bought...
Pic you requested
537284
The guy I bought it from was in his late 70's and he told me it was his Dad's plane from when he was an apprentice, so well before 1972. -
15th April 2024, 07:34 PM
- Replies
- 43
- Views
- 1,043
I have asked the seller for you, lets see if they...
I have asked the seller for you, lets see if they respond
-
15th April 2024, 10:07 AM
- Replies
- 43
- Views
- 1,043
Looks complete just needs a replacement stock...
Looks complete just needs a replacement stock clamp, I have a spare one from an MF
-
14th April 2024, 03:08 PM
Thread: epoxy resin
by Camelot- Replies
- 5
- Views
- 682
How does the boat builders Resin compare ...
How does the boat builders Resin compare
Epoxy Resin, Glue & Adhesives | The Boat Warehouse | Australia -
13th April 2024, 02:06 PM
- Replies
- 1
- Views
- 498
Not sure what commands you have in Sketchup, but...
Not sure what commands you have in Sketchup, but in AutoCAD for lines you can use the offset command and for objects (blocks) you can just copy them in any direction by a set distance.
-
11th April 2024, 10:05 AM
Thread: Thicknesser advice
by Camelot- Replies
- 25
- Views
- 864
If your looking at a benchtop machine then I...
If your looking at a benchtop machine then I assume you are more of a hobby woodworker, so because you can turn those cutters 4 times, they should last you for quite a few years.
-
Not seen those on an MA before :U I think the...
Not seen those on an MA before :U I think the rust remover would be good and then treat it with a sealing spray to prevent flash rusting, for the sharpening do you have a diamond flat stone or Card
-
10th April 2024, 09:21 AM
- Replies
- 20
- Views
- 1,074
It's made in England, but if it was a US plane...
It's made in England, but if it was a US plane wouldn't it need to be Blue in colour for it to be a Type 20?
-
9th April 2024, 12:01 PM
Thread: English made Stanley-Bailey Planes
by Camelot- Replies
- 54
- Views
- 56,412
I used to work for Osborn Steels at their Rutland...
I used to work for Osborn Steels at their Rutland Road works and the Stanley factory was just up the hill from me.
The HOME of Stanley Tools
I have a few Stanley and Record planes, both firms... -
It might be the case that with Wadkin Bursgreen...
It might be the case that with Wadkin Bursgreen Tags the first 2 numbers are the year of manufacture.
-
That Machine & Test Number are already on the...
That Machine & Test Number are already on the list the year is 1951
-
4th April 2024, 03:51 PM
- Replies
- 3
- Views
- 477
So when you press the machine against a piece of...
So when you press the machine against a piece of stock does it not plunge forward until it hits the stop?
https://www.youtube.com/watch?v=_M4D1wVcKIs -
3rd April 2024, 09:27 AM
Thread: Gregory Machinery still trading ?
by Camelot- Replies
- 28
- Views
- 2,940
Looks to be a few things worth buying
Looks to be a few things worth buying
-
3rd April 2024, 09:01 AM
- Replies
- 1
- Views
- 184
VINTAGE ANTIQUE GEM ICE SHAVE NORTH BRO’S MFG.CO....
VINTAGE ANTIQUE GEM ICE SHAVE NORTH BRO’S MFG.CO. PHILADELPHIA | eBay
American Kitchenware for shaving ice -
1st April 2024, 07:01 PM
Thread: Kirchner 16" Jointer.
by Camelot- Replies
- 4
- Views
- 395
Your machine could be older, I got a pic from the...
Your machine could be older, I got a pic from the front of that German machine and your fence is rounded at both ends where the German advertised one is square on the right side, does yours have the...
-
1st April 2024, 12:31 PM
Thread: Kirchner 16" Jointer.
by Camelot- Replies
- 4
- Views
- 395
I had a quick look online and from the pic's I...
I had a quick look online and from the pic's I found your pic looks like the one for sale in Germany, so you have an identical machine with the same missing part?
Pic's of your machine would be... -
1st April 2024, 11:45 AM
Thread: Wolfenden Jointer
by Camelot- Replies
- 2
- Views
- 177
If that part is missing get a metal worker...
If that part is missing get a metal worker (unless you can do it yourself) to mill a piece for you with a tapped hole in the back for a threaded rod, then get a wing nut (or nut and spanner) to...