Search:

To me it looks like the veneer got damaged when cutting the doors/panels to size from the large board, it may have delaminated slightly and even chipped, then the edging got glued on, but overtime...

It sounds like there is something wrong with it Wadkin during their 8 hour test would have picked that up and sorted it out before it left the factory.

That edging is to give the appearance of a quality multi ply board, under that edging is the substrate MDF or chipboard, because if you have plywood under that edging then apart from it not possibly...

With you being new to the Forum your replies will be vetted and not be posted instantly, but for now they show in the Activity Stream

I would say that the guy that built your wall wears a big hat and spurs.

I thought the blockwork cores were empty when looking at the return pics.

That front elevation must get some comments...

If you crop the image slightly, then for some reason the pic's will appear the right way up :)

So looking at the pic's your only 3 blocks high and you have used a decorative concrete dry joint...

Some pic's would be helpful.

How high is the wall? I ask because I have seen some very dodgy retaining walls holding up more than 1M in height of soil that really needed an engineers input,...

Concrete slabs need 4 to 6 weeks to release moisture and the thicker the slab the longer this will take, bedrooms with carpets can smell from mold because they have been laid too soon. With your...

Maybe a silicone spray would work better

Silicone Lubricant Spray | WD-40 Water Resistant Silicone | WD-40

Do you have pic's of the underside of the bottom, did you buy kit's to make them?

I have an Altendorf, but not many small ones come up for sale, if your not bothered about age the Wadkin BGP 12" might be a good for what you need they are quite compact and there is one for sale in...

Most of them at the inquiry say "I don't Recall" they must have watched Ronald Reagan on the news when they were kids and thought yes I can use this at some point in my career.

But in answer to...

Where looking to build a Granny House (it's not a Flat) on my daughters land with a Shipping Container Shed (2 Containers spaced apart with a steel frame between forming a workshop)

With a Granny...

Here's a report saying there's a bug in the system,

I don't Recall seeing this report,

but your name is on the mailing list,

Sorry I must have read the report, but like I said I just...

WOW some work went into those planes

Just to add a bit to the grain filling part of the conversation, for a while back in the UK around the 1980/90's Limed Oak and Ash became popular and interior designers would specify this finish, I...

Hi Rob,

Thanks for your reply, I was interested because you mentioned dipping your rubber directly into the shellac when bodying up, which I have never heard of and wondered how that came about as...

For anyone starting out, these 3 videos have enough knowledge to get you on your way

Hi Rob,

In Australia Cabinet Makers gain a qualification through Tafe, so do I take it wood finishing does not form apart of the curriculum to achieve that qualification?

Like I mentioned...

Each new coat (layer) becomes apart of the previous coat, so bodying is creating an amalgamated thickness of shellac, where individual layers don't exist.

For me the use of pumice was only to fill the grain once you were happy that had been achieved you would continue just adding more coats of shellac to build up a body, the bodying process gives the...

In the UK French Polishing and other more modern finishes formed part of the Cabinet Makers City & Guilds qualification back in the 1970's/80's (not sure about today) so we were taught to use fine...

Is this board from another property? they will have balanced the 3 phases

That's an old board, someone seems to have cut the panel to add a new RCD and done a poor job of the cut out with them sticking loads of blue tape around it.

It looks like that board is already...

Yes I was thinking of how that would work, I think a hollow lever with the other one inside and Wadkin probably changed the design to make the hollow one more robust.

Hi Rob,

Yes the later clamps were angled down, so Wadkin were definitely looking to address the movement of stock, I have attached a couple of pics from later ME's the first is from another ME...

Hi Vann,

Thank you for the pic's, they confirm what I thought about the single shaft for the lever pull downs on the earlier ME's, the other interesting thing about the pull down levers on this ME...

Found this ME illustration from a 1928 Catalogue, still single shaft, but look at the direct drive motor configuration.

537571

I wasn't sure about those because they didn't look very wide, but the shape of the bottom of the casting looks right with the bolt down floor lugs

Looking at this picture from 1924 there seems to be 6 Wadkin Single Shafts ME's sitting in a row, I think they were cast in batches of 6, it looks like they have some of there wheels fitted.

537569

There is a Neutral busbar at the top right but it's not being used because you have individual RCBO fitted.

There aren't many videos showing Australian boards, here's one with 2 RCD's with 3...

A RCD can have a number of breakers (circuits) with a common natural busbar, if the consumer board has 2 RCD's then each RCD will need it's own common busbar, you can not share one busbar between 2...

Yes true, there would need to be some load on the consumer board, so turn on a few lights and or appliances, before touching neutral and earth to trip the RCD.

This video demonstrates what I...

Hi Vann,

Looking at your list of Test Numbers I see a ME 239 Test 2085 that lives in NZ, do you know the owner of that ME or do you have pic's of it, because if I am correct it should be a single...

Without a tester if there is a RCD breaker at the board just touch neutral and earth to trip the circuit

Is that a fan or just a light fitting? the wiring looks like it's part of a daisy chain feeding a number of light fittings.

A ceiling fan would only need a twin & earth single cable unless there...

I have just noticed something about the ME Rob posted, it does only have one shaft for the pull down chain & chisel levers, just like what is shown in the 1924 catalogue, so Wadkin changed their...

I think you should do the confusing backwards direction first where the machines are more interesting although you may not get many new Tags being offered due to commercial Woodworking Shop's...

Can't you take the cover off where the grease nipple is and have a look inside, the grease may have dried over the years so you could rest that end in solvent and remove the old grease then reapply...

Looking at the list of Test Numbers your ME is already listed, but unlike later years there isn't a defined start and end Test Number at the beginning or end of a year to give a clue which year yours...

So you sanded back your old finish and found a nice coloured raw wood which you wood like to keep, but unfortunately any finish will darken raw wood.

I use CUTEK because it's an oil based product...

It's good the substrate was plywood and not MDF like we see these days, it would have swelled and never gone back to it's original thickness/shape, great job on matching the veneers and your...

Hi Andy,

It's the Test Number we need to date your ME, Wadkin used a pre printed book of numbers and the number from the page where they Tested the machine was recorded on the TAG

Here's an...

Does your contact have Test Record books going back to the 1920 like he had for my 1954 EX?

Thanks, not sure why some Copy & Paste work while others don't.

I corrected the year to 1928

Sorry, I just did a copy & paste and on my pc the pics looked great, I didn't realize no one else could see them, that's a shame because I thought it was a quick way of getting big pic's posted.
...

Sorry Vann this is in OZ not NZ

The seller of the ME on FB, found the TAG it was is it's correct location based on the other ME's we have pictures of
...

Vann,

Looking at your list you don't seem to have this Tag

537305

And it lives in NZ

The seller sent me a pic of the electric motor Tag, so I went back to them to see if they could find where the Wadkin Tag might have been, Andy's ME Tag is in the same position as the one I posted,...