Search:
Type: Posts; User: Brice Burrell
Search: Search took 0.00 seconds.
-
8th January 2012, 05:07 AM
Thread: Free HEPA filter from Festool
by Brice Burrell- Replies
- 1
- Views
- 1,554
I doubt that will happen. There are new...
I doubt that will happen. There are new regulations in the USA for all construction that might disturb lead based paint. The reason that Festool USA is doing it because the old HEPA filters that...
-
29th November 2011, 12:24 PM
Thread: Rotex Heat
by Brice Burrell- Replies
- 5
- Views
- 1,804
I think what you are experiencing is normal based...
I think what you are experiencing is normal based on my own personal experience and that of many users from Festool USA's forum. All of the Rotex sanders run pretty hot, even more so when they are...
-
15th November 2011, 08:34 AM
Thread: TI 15 Impact Driver
by Brice Burrell- Replies
- 35
- Views
- 6,102
Very cool. Anyone want to start guessing what...
Very cool. Anyone want to start guessing what the new tools will be??
-
6th November 2011, 08:31 AM
Thread: MFT3 table.
by Brice Burrell- Replies
- 6
- Views
- 2,482
You need a 1/2" or 12mm shim (plywood shown in...
You need a 1/2" or 12mm shim (plywood shown in the image below) between the extension top and the mounting bracket to make the extension flush with the MFT. You will also need long bolts once the...
-
1st October 2011, 05:47 AM
Thread: Kapex MFT
by Brice Burrell- Replies
- 2
- Views
- 1,351
I assume you mean the older model MFT tables, the...
I assume you mean the older model MFT tables, the MFT 1080 and 800, not the MFT/3. Not that it really matter since the answer is same, no, none of the other tables connect to the MFT/3-Kapex.
-
20th September 2011, 11:38 AM
Thread: Parallel ripping fence
by Brice Burrell- Replies
- 16
- Views
- 3,107
I did a review of the parallel guides a couple of...
I did a review of the parallel guides a couple of years ago, you can check it out on my website. The guides are nice but they also have some draw drawbacks. Overall I like them.
Review of the... -
12th September 2011, 03:10 AM
Thread: ETS 150/3 models
by Brice Burrell- Replies
- 16
- Views
- 4,656
Craig, the EQ does have the Plug-It (detachable)...
Craig, the EQ does have the Plug-It (detachable) cord. I couldn't fine any info on the other two models so I'm not sure what they are. As for useful accessories, I think you'll want to look at the...
-
26th August 2011, 07:24 AM
Thread: festool cordless drill
by Brice Burrell- Replies
- 7
- Views
- 2,437
Well, the right angle and eccentric chucks set...
Well, the right angle and eccentric chucks set the Festool drills apart. I also think Festool's Centrotec quick change bit system is one of the bast out there. The drills themselves are first too...
-
22nd August 2011, 10:39 AM
Thread: Festool Guide Rail Bag
by Brice Burrell- Replies
- 7
- Views
- 2,145
I'd guess you have the old version of the bag...
I'd guess you have the old version of the bag like I do. The new version doesn't have large outside pocket for the 800mm rail.
-
22nd July 2011, 07:37 AM
Thread: Protool or Festool Vac?
by Brice Burrell- Replies
- 6
- Views
- 3,105
There is a version of the CT26/CT36 vacs that...
There is a version of the CT26/CT36 vacs that have the auto cleaning feature that are available in Europe (and maybe Downunder as well). I'm pretty sure the CT26 I compared the pricing with did not...
-
21st July 2011, 07:23 AM
Thread: Protool or Festool Vac?
by Brice Burrell- Replies
- 6
- Views
- 3,105
Justin, the Protool vac is 48 liters with the...
Justin, the Protool vac is 48 liters with the auto cleaning function, I think that would explain the big price difference.
-
28th March 2011, 11:31 PM
Thread: This looks good...
by Brice Burrell- Replies
- 2
- Views
- 1,170
I have a set, I did a review a couple of years...
I have a set, I did a review a couple of years ago. Review of the Festool Parallel Guides
-
21st March 2011, 12:33 AM
Thread: I Haven't seen this before
by Brice Burrell- Replies
- 13
- Views
- 2,444
The hose garage isn't needed to fit the...
The hose garage isn't needed to fit the Workcenter, at least not on my N. American versions. Also works with the boom arm.
BTW, it is possible to make the Workcenter work with the CT Midi/Mini... -
11th March 2011, 01:30 AM
Thread: I Haven't seen this before
by Brice Burrell- Replies
- 13
- Views
- 2,444
Here's my review, I plan on updating as I get...
Here's my review, I plan on updating as I get more hands on time with the Workcenter.
Review of the Festool Workcenter WCR 1000 -
4th March 2011, 09:28 AM
- Replies
- 3
- Views
- 2,819
You guys are going to love the new T-Locs, so...
You guys are going to love the new T-Locs, so much easier to use! :2tsup:
Tanos makes the Systainers for Festool and numerous other companies. Festool, Tanos, Protool and other companies are... -
4th March 2011, 09:23 AM
Thread: I Haven't seen this before
by Brice Burrell- Replies
- 13
- Views
- 2,444
I've had a day to play with the new Workcenter...
I've had a day to play with the new Workcenter and I have to say so far I really like it. Here's a quick video I shot today.
YouTube - Festool Workcenter -
15th February 2011, 12:50 AM
Thread: I Haven't seen this before
by Brice Burrell- Replies
- 13
- Views
- 2,444
Well, it is and it isn't. It's featured on...
Well, it is and it isn't. It's featured on Festool USA's blog and I would expect to see it March first on the regular site.
The new Festool Workcenter WCR 1000
I've pre-ordered one, when it... -
12th February 2011, 04:47 AM
Thread: FESTOOL query #4 – T18+3 Drill
by Brice Burrell- Replies
- 12
- Views
- 4,592
I've found the Centrotec brad point drill and...
I've found the Centrotec brad point drill and forstner bits to be of outstanding quality. I have no experience with the Colt 5 Star bits so I can't give you a comparison. BTW, I also have the...
-
12th February 2011, 03:38 AM
- Replies
- 2
- Views
- 2,680
Brett, I've got some of their specialty bits and...
Brett, I've got some of their specialty bits and they are first rate. I wouldn't bother with expense of Festool bits for the common profiles, Whitesides are also top notch and are about half to two...
-
12th February 2011, 01:18 AM
Thread: The Yanks just don't get it
by Brice Burrell- Replies
- 2
- Views
- 1,450
Well, I'm a Yank, here are some of my thoughts. ...
Well, I'm a Yank, here are some of my thoughts. We don't get all of the tools, and the ones we do get arrive here a year or more later than you get them (and we don't have the ProTool brand here.) ...
-
21st November 2010, 02:44 AM
Thread: TS55 Blade burn
by Brice Burrell- Replies
- 7
- Views
- 1,734
I think the first thing to look at is if your...
I think the first thing to look at is if your blade is dulI. From your description it doesn't sound like the splitter is out of alignment. The track isn't going to become misaligned but the saw...
-
31st August 2010, 10:52 AM
Thread: Something called a Domino?
by Brice Burrell- Replies
- 12
- Views
- 1,975
That someone is Rick Christopherson, here's the...
That someone is Rick Christopherson, here's the link: http://www.waterfront-woods.com/festool/Domino_DF_500.pdf
-
18th August 2010, 04:38 AM
Thread: Laser light intensity varies
by Brice Burrell- Replies
- 5
- Views
- 1,371
Jill, I'd guess there is dust causing the one of...
Jill, I'd guess there is dust causing the one of the lasers to be a little dimmer than the other.
-
9th August 2010, 01:33 PM
Thread: Domino thickness
by Brice Burrell- Replies
- 2
- Views
- 1,680
Jim, Festool offers a 4 mm cutter and tenons for...
Jim, Festool offers a 4 mm cutter and tenons for 1/2" or 12 mm stock. I'm sure you could use them with your 10 mm ply although the tenon won't be centered in the ply. Spacing isn't critical on...
-
7th August 2010, 12:01 PM
Thread: Buying a Domino
by Brice Burrell- Replies
- 89
- Views
- 10,544
I think you'd be father ahead using the Domino on...
I think you'd be father ahead using the Domino on a perfectly flat work surface. It doesn't take much error in alignment of the tool before it affects joint. In other words, if your stock is...
-
3rd August 2010, 12:53 AM
Thread: How to do a controlled depth cut
by Brice Burrell- Replies
- 13
- Views
- 3,934
Did you read the manual? :no: :U Here's a...
Did you read the manual? :no: :U
Here's a link to what Rob is talking about (you can thanks Rob because this is from his review).
Kapex review
The info you want is about half way down the... -
25th July 2010, 12:12 PM
Thread: TS55 Track Saw Problem
by Brice Burrell- Replies
- 24
- Views
- 5,450
There is a product out of the USA called the Qwas...
There is a product out of the USA called the Qwas square for the Festool guide rails. Great product for making square cuts. I don't it it would be worth the cost of importing one or not. They retail...
-
8th June 2010, 11:56 PM
Thread: Domino techniques
by Brice Burrell- Replies
- 16
- Views
- 4,470
I have one of these and from my limited...
I have one of these and from my limited experience it's been a nice accessory. One advantages you have over the aluminum spacers is you're not limited to a select number of spacings. The MGS can be...
-
10th April 2010, 12:36 AM
- Replies
- 0
- Views
- 3,738
How to use the Parallel guides with the LR32 hole drilling system.
How to use the Parallel guides with the LR32 hole drilling system.
All text and photos by Brice Burrell, copyright 2010.
http://www.burrellcustomcarpentry.com/images/PIC_2515sm.jpg
When I... -
20th February 2010, 05:06 AM
Thread: Dangerous Kapex
by Brice Burrell- Replies
- 49
- Views
- 10,509
I'd like to add a few things to this discussion....
I'd like to add a few things to this discussion. The car industry doesn't recall vehicles because of a small number of incidents (generally speaking) and they certainly don't do it for for the good...
-
15th February 2010, 01:36 AM
Thread: Can you use a 250mm Blade in Kapex?
by Brice Burrell- Replies
- 4
- Views
- 2,596
Sorry, I didn't see this post before. Yes, 250 mm...
Sorry, I didn't see this post before. Yes, 250 mm blades do work in the Kapex. There are several companies in the US reboring the arbor of 10" (250 mm) blades to fit the Kapex.
-
14th February 2010, 05:21 AM
Thread: What type of Sandpaper for a Rotex?
by Brice Burrell- Replies
- 10
- Views
- 3,847
[/LIST] I was wrong about the new Granat...
[/LIST]
I was wrong about the new Granat abrasive. I had it backwards, Granat is made for solvent based VOC finishes and other hard finishes. -
14th February 2010, 05:14 AM
Thread: New Tools Coming Soon....
by Brice Burrell- Replies
- 15
- Views
- 5,552
As it turns out, this is not correct, you aren't...
As it turns out, this is not correct, you aren't going to be able to carve with the new Carvex jigsaw. Festool USA's CEO set the record straight on the FOG forum.
-
11th February 2010, 01:59 PM
Thread: ts75 limits
by Brice Burrell- Replies
- 4
- Views
- 1,380
I've never worked with the stuff so you may be...
I've never worked with the stuff so you may be right Justin about a blade with fewer teeth, a rip blade or the 36T universal blade. The high tooth count of the solid surface/laminate blade at full...
-
11th February 2010, 01:49 PM
Thread: Multi-Jetstream question
by Brice Burrell- Replies
- 6
- Views
- 1,170
I think this sound advice. I'm sure there is some...
I think this sound advice. I'm sure there is some improvement in performance of the abrasives but I doubt it's enough to discard the old sanding pad. I'm taking Rod's approach and replacing my 150 mm...
-
11th February 2010, 01:52 AM
Thread: ts75 limits
by Brice Burrell- Replies
- 4
- Views
- 1,380
I'm wasn't familiar with Durra panel so I looked...
I'm wasn't familiar with Durra panel so I looked it up. I assume the density and thickness of the products makes it so difficult to cut. I have two recommendations you may want to try. First is a...
-
29th January 2010, 12:41 AM
Thread: Dangerous Kapex
by Brice Burrell- Replies
- 49
- Views
- 10,509
Anthony is right, this is a safety issue so the...
Anthony is right, this is a safety issue so the problem needs to fixed correctly. I meant my reply to get you back up and running until you have time to get it looked at.
-
28th January 2010, 02:08 AM
Thread: Dangerous Kapex
by Brice Burrell- Replies
- 49
- Views
- 10,509
This has been discussed on the FOG forum. Check...
This has been discussed on the FOG forum. Check out Rob's reply number 7 here: KAPEX update
And this thread seems to have a long term fix:... -
26th January 2010, 06:51 AM
Thread: Festool Sander Vibration
by Brice Burrell- Replies
- 25
- Views
- 4,907
I'm glad it all worked out for you. I agree this...
I'm glad it all worked out for you. I agree this is a bit strange that Festool doesn't make this info more readily available. Although, both of my ETS125 and DTS400 worked fine without any break in...
-
25th January 2010, 11:45 AM
Thread: Best tool for this job?
by Brice Burrell- Replies
- 10
- Views
- 1,602
I'm unfamiliar with this type of finish. As was...
I'm unfamiliar with this type of finish. As was already touched on, some caution is in order when sanding tough finishes so you don't damage wood, especially if it is a veneered surface. Also if...
-
23rd January 2010, 03:07 AM
Thread: Help with setup please
by Brice Burrell- Replies
- 9
- Views
- 2,617
Brian, I have a few ideas on what could be...
Brian, I have a few ideas on what could be happening. The first thing that comes to mind is a mistake in setting the fence height correctly. I'll assume you are indexing the the Domino off the base...
-
22nd January 2010, 06:15 AM
- Replies
- 32
- Views
- 8,519
I'm sorry, I meant the new CT 26 and 36 vacs. The...
I'm sorry, I meant the new CT 26 and 36 vacs. The older 22/33 models are available in the US.
-
21st January 2010, 02:49 PM
- Replies
- 32
- Views
- 8,519
Too bad the CT vacs won't make it to the US in...
Too bad the CT vacs won't make it to the US in the near future. BTW, that's 10 thumbs up. :U
-
15th January 2010, 11:26 AM
Thread: What type of Sandpaper for a Rotex?
by Brice Burrell- Replies
- 10
- Views
- 3,847
What material did you sand and what abrasive did...
What material did you sand and what abrasive did you use?
-
15th January 2010, 01:44 AM
Thread: What type of Sandpaper for a Rotex?
by Brice Burrell- Replies
- 10
- Views
- 3,847
I'm glad to help out. :2tsup:
I'm glad to help out. :2tsup:
-
8th January 2010, 03:57 AM
Thread: What type of Sandpaper for a Rotex?
by Brice Burrell- Replies
- 10
- Views
- 3,847
Hello, welcome to the world of Festool. Yes, all...
Hello, welcome to the world of Festool. Yes, all of the options for Festool abrasives can be confusing at first. I'll give you a quick rundown on each type of abrasive.
Rubin: Its made for... -
28th December 2009, 09:09 AM
Thread: Festool Sander Vibration
by Brice Burrell- Replies
- 25
- Views
- 4,907
Your not alone, other have had this problem...
Your not alone, other have had this problem before too. The small Festool sanders work better a the 6-8 hour break-in period. During this time the motor's brushes seat (wear in to fit the armature)....
-
10th December 2009, 05:56 AM
Thread: OF 1400 Edge Guide
by Brice Burrell- Replies
- 6
- Views
- 1,736
The part number is correct but the image shown on...
The part number is correct but the image shown on the Festool USA site is not correct (it's the OF1010 and part of the older model OF1000 edge guide). I searched the Festool Germany and Australia...
-
9th November 2009, 01:09 AM
Thread: Domino on ebay
by Brice Burrell- Replies
- 31
- Views
- 4,059
David, I hate when someone posts when they see a...
David, I hate when someone posts when they see a good deal on Ebay, while they mean well it only prevents guys like you from getting a the good deal. Too bad.
-
7th November 2009, 12:52 AM
Thread: Kapex Insert
by Brice Burrell- Replies
- 12
- Views
- 3,526
The screw holes were the exact right place too,...
The screw holes were the exact right place too, wow. :U Great looking wood.