Search:

G'day Mik
The pre thickened Epox-e-glue (1-1 mix) was what I used for all gluing and as I said I had no drama, I also used several coats of the 2 - 1 bote cote epoxy resin to encapsulate the...

I used bote cot epoxy glue to build a ply kayak which was temporarily screw fixed until the epoxy set then the screws removed, there are only approx a dozen mechanical fasteners in the whole boat and...

I would suggest that the timber in the marlin board is teak.
It is still available from various suppliers, try google or look in Australian Amateur Boatbuilder magazine for supliers adds.
Teak is...

I will put some pictures on soon.
I found the finish to be glossy enough (certainly not matt) but it just did not seem to level out once applied, the marks off the foam brush stayed pretty visible....

I have almost finished a 16ft Hartley kayak sheeted in hoop ply with hoop framing.
the whole thing is basically glued together with epoxy using temporary fastenings to hold things inplace until the...

G'day Rob
Just a note on the Jubilee boats, my Great Grandfather and Grandfather built several of them at Palm Beach N.S.W (around 1930's). I have seen one restored by a fella from around the...