Search:

It isn't too bad for musical instruments eg ukuleles either - just wrong state for me.
(Obviously not high end but any beginner builders it is ideal)

Hi KG
I'd be very interested in the finger jointer which is the piece aargh referred to.
I would also be happy to buy it without inspection if you could box it up, it's relatively small and could...

I had Hammer K3 attachment envy after I saw the small mitre attachment that came with a neighbors set up.
It has a pretty ingenious method of setting 90 degrees reliably - that was a step too far. ...

I bought a second hand 10" carbabtec jointer thicknesser and did it up for my own use.
There was a crack in the casting that really made the adjusting cam kind of useless.
I ordered this...

My Tormek 1200 1st gen was running really slow and needed a push to get it started.
Did some searching and decided to pull the shaft out and have a look.
Turns out the steel shaft rusts where it...

Bump - will close and head to other market places if no interest here soon

Ok - I promise I'm done.
Used the Al stand from a dead iMac.
Around 6.5mm thick, got some M4 stainless threaded rod and I'm actually happier with the last ones.
Silver ones bottom row with smaller...

And this is why you can never have too many clamps.
Hard to see but there are 6 crammed around this cutout - much easier to fit and reinforce for tuner/pre amp before the back is on.

525057

Yeah - those are actually quite bulky - even mine are bigger than I would like.
The black original is quite fine, very light and great for small spaces.
They are "futters" or at least copies of
A...

I was making some ukuleles the other day and was using some very small G clamps to hold small bits of timber reinforcing cutouts for tuners etc and I had to do one side at a time because I only had 3...

I'll take it.

Long Bed Jointer - 1400, helical cutter.
Cutters still have 1 clean rotation.
Built in mobile base
$900
Frenchs Forest Area


524504

524505

Add a dovetail slide joint to the plate and screw block, if ABS then smear with acetone, slide it in and it will never move again - would look awesome in two tone.

Not too bad, the power of 3D printing is doing the things that are painful by regular means
I've sketched on your model where you could easily thin to a web, all lumpy corners can be radiused, no...

More or less finished
Fwiw I shimmed for the festool with .8mm Aluminium flashing - again because I had it kicking around, it's super easy to cut and won't create a galvanic reaction on this jig....

I was pondering how to clamp a 45 degree edge into a corner when it all became obvious.
Clamp a square into the corner, do all the tap size drilling together on one end (label carefully).
Flip it...

Fusion was where I did my retrospective drawing, consider bringing the lock nut in from the side, then the captured nut can drop in a vertical slot.
You can also trim out a lot of bulk and add...

Honestly - I'd rather share the plans, share the love.
To monetise this would be a chore.
It's probably more than a few hours all told, on a small scale I'd be charging between 200-300 before it...

Last time I 3d printed anything near this size it took forever and warped a lot and also provided a few bird nests, good luck
I can add the diagonal ribs and send an stl file if you are that crazy -...

I saw a jig on facebook marketplace and got half way through buying it when I realised it was probably too cheap to be true.
(Tianli router jig will find it if curious)
It was advertising at $50 on...

Arrived in mint condition - will be well used, thanks.

I'll take the Stanley No. 80 Scraper
Thanks
Sean

I'll take it

I'll take it.

Heading to gumtree this w/e if no takers

Heading to gumtree this w/e if no takers

I have rebuilt two collectors from a collection of parts and have purchased missing components. Both collectors are pictured operating - you can see the bag inflated. They have minor imperfections...

I have rebuilt two collectors from a collection of parts and have purchased missing components. Both collectors are pictured operating - you can see the bag inflated.
They have minor imperfections...

I'll take it - PM sent to exchange details

I'll take it - If 2hp like I think it is

I find it hard to believe that no one in a position to make a difference can't see that the majority of games on subscription only = shrinking fan base.
NRL and AFL have a fair whack of games on...

Sold - hopefully off to get some real use.

I have no affiliation with any brand and agonised over switching from petrol to cordless garden tools (mower & brush cutter) for way too long.
For me the main contenders were Ego and Makita - AEG...

Yes still available

Carbatec Mortise drilling machine - very low usage.
Bolts to hold clamp to table may be missing, includes accessories and drill set as pictured.
$200

468640

SOLD - thanks rustynail - a pleasure to meet you

Price drop - $200 - one week then closing

Hi - Thread is 3/4 and 1 Morse taper

RECORD POWER - identical to Carbatec pro midi lathe with the Record power branding (carbatec - $535.20)

Loacation - Frenchs Forest area

Some light surface rusting

Price - $250

466937

Looks good - you may end up with little flat spots in between pressure points of dogs.
Type of glue will govern springback - if you use a pva or even crosslinking pva it will straighten a bit.
Use...

455921

This allows you to glue kerfings on both sides and wind in later for removal - first test works really well.
Threaded rod, 2 nyloc nuts, 2 T-nuts, 2 washers, scrap timber and about 10...

I was looking at buying a set from stewmac - predelivery almost $10 ea - after delivery more like $16
Threaded rod 1/4" - one length does 4, Tnut pk 4, Tube - 1 roll does 100, hard nylon for washer...

Sold - best of luck to dozerz

Yes - still available

Yes - still available.

Ryobi 400W Bandsaw - $150
As far as I can tell box was never opened, I can't give any opinion on it as I have no intention of opening it.
Selling for someone who purchased years ago and will never...

I'm in

Works well, turns well finishes beautifully but the dust is like breathing pepper - I've never worked another timber quite as harsh on the dust side.

Ok I might have this wrong but you may be better off with the domino machine flat on a surface and the piece vertical for one cut and face down for the other.
If you are referencing then taking a...

A little hard to see how you are using this jig without the workpiece or domino cutter in the frame.
Domino in a standard set up will be very close to the middle of the thickness of a 19mm board. ...