Search:

They were very innovative for the time.. The OA14 came out in the mid 70's but even the earlier models used the composite moulded top, bottom and internal bracing panels. The outer panels were glued...

I am not a wood worker because I do not have the space for the necessary equipment otherwise I would do the job myself.

I require 8 off 12mm MDF panels with straight-line routed slots for making...

The reviewer in this article seems to be expressing some misgivings at the takeover
http://www.onlinetoolreviews.com/reviews/tritonrandomorbitsander.htm

IMO Triton quality will probably...

Strange... GMC isn't listed as a service agent/repairer for Triton in Victoria according to this document available on the Triton website.
http://www.triton.com.au/documents/download.php?id=139

Here's a MSDS for Laminex HD3 http://www.thelaminexgroup.com.au/downloads/trade_essentials/030401-0205_TE_HD3.pdfAs long as you use a dust mask while sanding you should be fairly well protected from...

Unless it lands on the chuck like my DeWalt drill did. Permananently bent the drive shaft thus consigning it to the junk bin.

I didn't try to catch it as it fell so I remained intact.

It isn't quite that simple unfortunately. The old story about "memory" effect really only applies to Ni-cd (Nickel Cadmium) batteries but the trend these days is to use Ni-Mh (Nickel Metal-hydride)...

My experience with power tools... You get waht you pay for.

An example. I was setting out to build a gable roof pergola using a stack of old jarrah timber I had left over after renovating the...

The story the girl told you is basically true of all mdf no matter what the finished thickness or density. It is laid out in a moist layer and compressed under heat so it finishes up a lot thinner...