Search:

The shroud covers the switch when it is off. You have to push it open to turn it on. Or have I misunderstood you?

Where is Loomo?

Looking for anyone living within reach of Malvern East with a TRA001 router who would be prepared to assist. I have been contacted by someone who has one that won't start. I have taken him through...

I think it is perfectly possible to attain accuracy to 0.5mm on a 2000.

If you can use a 12mm collet I have a new one I can supply.

I'm not sure you should have been trying to use a bit that was only 0.478' diameter, but as to how to undo, when I have been overtight when doing up I use a hammer or mallet on the spanner to undo....

there are some on ebay. this one is the cheapest:
Triton Workcentre mk3 parts - One L-Shaped Locking Pin. | eBay

I have been approached by a non-member who has a number of Triton items for sale - he is wanting them to go to a good home. He lives in Uranquinty near Wagga NSW.

His message is as follows:...

535966535965

They are indeed. Gives you a bit of leeway in the cutting and a cushion look.

I'll do better than Australian Woodsmith most days!
Thanks for the kind words.

I forgot to take a photo of the handmade wooden hinges. They are the same as on this earlier box.
535253

Thanks. I gave him some uncut spares in case he wants to subdivide or rearrange.

Yes, he was very happy. But his wife makes jewelry and was eyeing it jealously!

The box carcass is made from fiddleback redgum. The light tiles are birdseye Maple, the dark ones are Jarrah and the intermediate ones are forest redgum.
The linings are felt.
the inserts are Huon...

I made this for my brother's 70th birthday. Combined two Woodsmith plans by scaling back a jewelry box and using another for the lid. As is usual in my experience (why do i never learn?) the lid...

I recently sold one on Facebook on behalf of my club for $300. It didn't have any of the rust shown on this one, but also didn't have the sander or jigsaw. There were indications that one or two...

PM sent

I have two router fences with micro-adjusters. rods are 116mm between centres, 8mm diameter. Free with postage extra.
533919
Also this clamp bracket, looks like it came off a mitre saw
533926

Anyone recognise which router these are for?
533810

My experience is different to that. There have been at least three versions of the controller, presumably each being an improvement on the previous.. Perhaps you were sold old stock?

I agree it could be either worn brushes, or the speed controller, which were iffy in earlier models - I have replaced one of mine.
If you need a new controller my club has one here:
Classifieds –...

I have a Delta TP400LS which is the same as your machine. I have the same problem and have once before replaced the pulley , belt and key. It recently broke down in the same way and I have ordered...

Now sold

Now listed 登录 Facebook

531181

The owner of this Shopsmith in Canberra, an elderly gent, wants to see it go to a good home. Any interest let me know - the price is expected to be very reasonable. Includes saw, bandsaw,...

This thread may be relevant:
https://www.woodworkforums.com/f20/triton-tra001-router-187478?highlight=triton+router+switch+problem

I haven't struck this problem, but I recall some others have, and found dust in the switch to be the problem.

Have you tried switching the good speed controller over?

Overhead assembly for Triton MK3 (blade guard and riving knife) | eBay


BTW if anyone has a discarded mark 3 riving knife/guard holder I believe I can convert it for a 2000 guard.

This can be caused either by the nylon winding shaft teeth wearing out, or by the teeth on the turning knob insert (TRA148) wearing out. In the case of the former the nylon shaft was changed to metal...

What did yours die from?

As the maker/seller of many replicas, I am mystified as to where the missing saw supports go. They surely have no use as anything else. It also suggests a lack of due diligence on the part of the...

see here:
Classifieds – TOCACT

Nettlewarbler,
We aren't sure how familiar you are or are not with the operation of the router itself. Suggest you take the router out and send us a photo of the handle with the turn mechanism in...

yes

Yes, sorry to be abrupt. What we need to see is a view of the winding handle underneath the table so that we can see its position in relation to the shaft on the router that it's supposed to connect...

two pictures of a glove aren't helping us!

Suggest taking the router out and making sure the winding handle works out of the table. Then it's just a matter of aligning the router winding shaft with the hole?

Many thanks!

526944Found these at my late brother's house. No idea what the tool is that's missing, and not sure what the nozzles might be for - irrigation? They appear to all have the same aperture.

I bought an expensive Roarockit bag a few years back, which works OK but requires a lot of hand pumping. A member of our club recently demonstrated a vacuum clothes storage bag, $50 for 10, which can...

That link doesn't work for me. Just takes me to a blank screen.

PM sent

Yes, a copy would be great!
Thanks

Request withdrawn

Someone has approached my club looking for a manual for the TPT 15. Anyone able to help?

Anyone intending to do a trip with a ute, van or trailer able to take a 2m long piece of timber?

Is it this one?
Attention Required! | Cloudflare

登录 Facebook

I wonder what the background to this is - someone must have been expecting a lot of failures.