Search:

I think PU is the best choice.


Thanks

Just use the same finish with your floor.

Thanks

Good luck

You cannot repair the veneer problem with the varnish or other finishing materials

But you can paint it to cover up your veneer problem.

Thanks

The sanding sealer is the clear coat that is designed to be easily sanded. It is very similar with the top coat but with sanding agent inside.
The sanding sealer is applied especially to prepare the...

Yes it is.
You have to some trial and error to get the color matched. I always try some pieces of wood panel when matching the color. We never start finishing the product before we feel happy on...

To get the white color you need a strong chemical bleach. You can use a hydrogen peroxide ( part A) with sodium hydroxide ( part B).
You also need heat to get the best result.

Mix the part A with...

I think you better start with the air spray gun. It is quite low price, simple and flexible.
You can buy a cup gun and of course you will need a compressor for the air supply.
There are many brand...

Yes some insect like eat wood. Some wood are also susceptive to the insect attack.
You shout do pretreatment to your wood before start processing it.
There any method to treat the wood. Now the...

I am afraid that you have to sand all your deck. Then you can start your finishing process with new system and with the proper material. It is very difficult to match your finish without clean off...

Yes, you can tone down your pink (red color ) with the green color stain. (EDIT: Link removed by moderator.)
But you must do carefully. You better to apply your stain with spray gun. By the spray...

yes it is.

Your finishing step should be as follow:
1. Filler, let dry and sanding
2. PU black base coat, spray let dry and sanding
3. PU Black base coat , spray let dry and sanding ( You may...

The furniture is basically the easiest varnish in term application. It drying faster and most proper for furniture finish.
The floor varnish has medium elasticity and strong enough tho withstand the...

I install the oil and water trap before the pressure regulation for the spray gun

The air pressure for the hvlp spray gun should be set at about 2 bar. if the air pressure is too high then he act...

There are some type finishing material are design for outdoor. The material selection is depend on the finishing look, color and quality required.
The PU outdoor is may the most durable material...

If it written it doesn,t need thinning, then you may don,t need to.

You better try to spray it and see the result. If you fell the lacquer is too thick then you can add some lacquer thinner to...

To make high gloss finish is tough work. Especially in the black color.
You need to do good preparation from your unfinished product. The surface has to be neat, even and smooth from the beginning....

When you are going to do finishing process on a big furniture, you should do some trial first on some wood panel board. Make a step panel as your finishing model. Then you can do your finishing...

For outdoor use, you have to use the exterior finishing materials.
My favorite for outdoor wood finish is spar varnish.
It is a simple finishing material, easy in application and designed for...

Just do some trial on a piece of wood panel.
See the result, if it can dry then your varnish is still in good condition.

Good luck

wisno

To finish in high gloss is rather difficult. The some minor defect that may not visible in the low gloss will seem obviously in the high gloss. You need to prepare the good finishing room and also...

I think better you strip your old finish and start to refinish it.
Use a chemical stripper to do it.

You may apply clear coat on your old finish, but it will give you uneven color since your...

You have a very good wood.
I agree with you that the natural finish will give you good looked.
You can get natural finish with the application of clear coat without any stain.
There are many type...

The finishing is really depend on your need. If your wood carved is going to be placed in the outdoor, you need the outdoor finishing material.

I think you use the spar varnish. It quite easy to...

Sanding the wood is very critical to make good quality finishing.
The sanding has to be done gradually with the coarser sandpaper grade to the finer.

The final sanding before the finishing...

yes, you can tint the oil finish with the oil stain type.

EDIT: Link removed by moderator.

good luck

wisno

Yes the basic color to make stain are the red, yellow, black and blue.
The other color ( except white) can be made with these basic colors.
The brown color is the perfect mix of that basic color....

You can apply an oil finish, such as teak oil, tung oil or polyurethane finish.


Good luck

1. In my opinion you better just apply clear coating on walnut. walnut has a dark color with very nice grain. It is better to finish in the natural wood color.
2. You can use wood filler if you want...

How do you apply the shellac? If you apply the shellac by wiping, padding or brushing, sure it will resolve some of the stain underneath.
The best way is to coat the shellac by spray.
Or you can...

What finish on your table?
You may try to wipe off your oil with a mineral spirit. It may help to clean up your oil, but if your finish is an oil finish it will dissolve your finish.
If it is does...

You can refinish your old table without have to know the previous finish.
Wipe off your old finish with acetone, and sand your wood until your get smooth and even surface and you can start your new...

There is a few method you can try.
1. Do with stain. Try to apply a white stain on your wood. Spray it lightly until you get the effect.
2. You can use a bleach chemical. It is a chemical work for...

Yes You better apply wood filler to fill in your pores. There are many filler types, but i think you better use the waterbased filler. It easy to be applied on and compatible for most clear coating,...

Yes it is.
It is very difficult to get the dark color by wiping application stain.
Np matter how many you apply your stain it will give you the same result.
You may try to to use the darker...

I don't know the spray booth supplier in Sidney, but i know some in Indonesia.
If you are interested, please send message.
And i will give You some address that you can contact.


Good luck
...

To remove paint and refinish is quite tough work.
You can remove a resolved paint by using a paint thinner, but if it is not work you need a chemical stripper.
You also need to re sand until you...

Yes, spray system now is the most popular way to apply the finishing material.
Almost all finishing material can be apllied by spray.
By the spray application we can get the even, smooth with...

For the raw wood you need to sand with 180 grade.
To sand the coating you can use the 280 in the prime coat and 320 or 400 before the last coat.

Good luck

Well it rather difficult situation. It seems the to re sand your old finish is the only option you have.
You may try to do some application on your previous finish, but the result may not satisfy...

Yes the 2 pack polyurethane is good for your table.

HVLP gun is a spry gun with low air pressure, it will give you less over spray.
Theoretically it will give you more deficiency in the transfer finishing materials. It means that more materials will...

Wow, it is a big gap.
In my opinion you should insert a piece of wood to fix it.
Use piece of wood with same grain pattern.
Using wood will give better match than the other material.

good luck

Yes you can do with the oil finish. It create natural looked that is match with the appearance that you want. But since you don't want the red color you have to kill the red of the wood with the...

To get your finish smooth you need to sand the varnish and redo the varnish application until get the smooth surface. Do thea sanding between the varnish with a sterated sandpaper with 320 or 400...

You can do with a outdoor finishing materials.
The outdoor pant material is the same like the indoor finishing materials but it is designed for outdoor.

If you want to do with varnish, please...