Search:

+ 1

Also the tine that had the spare patches in had a lid with what looked like a rasp for roughing the area around the puncture hole to provide virgin bounding of the patch

Impressive :2tsup:. How long did it take for the cnc to do it and how long did it take you to create the file for the cnc?

You do yourself an in justice, you have created what you want, done your way and as you said, it tells a storey and your introduction to the photos is a worthy tale. :2tsup:

Make sure you use the mastic sealant NOT SILICON for joints/junctions of wall/floor/step/bath with the reinforcing fabric.

NO !!!!
Use the correct compressed sheet either 19 or 22 is ok and a minimum of 3 coats of waterproof membrane

Minimum size for stormwater pipe to street is now 100mm

As Camelot said, Seeing that you live in Madrid Spain, I assume that you will have hardware stores or metal merchants there who may already have a suitable bracket you can use to replace the plastic...

Constant changes in humidity, boards warping/splitting, constant changes in humidity works the nails and the boards become loose, mould starts in the tongue and groove and also behind the boards and...

Words fail me........

I strongly advise not to use pine DAMHIK.......even if you take all the correct fixing/sealing/waterproofing procedures, it will not end well

25mm for solid timber, 32mm for MDF

:2tsup: x 10

That is illegal if there is no s trap at the point of connection. Nothing to stop vermin (cockroaches) from travelling up it regardless of how often you use and flush it but more importantly the...

There is no denying your vision, commitment, aesthetic creativity and skills that have grown with this. Anyone would be hard pressed not to like this and to anyone who sees it for the first time...

Yes and also glue a puddle flange Just a moment... that 50mm below finished concrete level

I have a Best Sheds double garage 7.5m x 6.0m which I just recently added a 3rd bay to.
The original shed was a breeze and no problems with quality.
I have also had friends get their sheds from...

The sides are laminated together on the left one in the photo, join is in line with top of 2nd box joint and top of and bottom of 4th box pin

:2tsup: x 10

:2tsup: x10

If my interpretation of your photos is correct I am almost certain that the stiles/mullions of the windows are the structural supports for the roof which was a fairly common technique of that era....

Japan to launch world’s first wooden satellite to combat space pollution | Satellites | The Guardian

Declare

We have been missing you, wish you a speedy recovery and much appreciated shed time

That sunset is Awesome

https://www.youtube.com/watch?v=U0STET0yVhk

Nothing odd about that :rolleyes:

Get a metal roofing contractor or roof plumber to have a look at it.
100% change downpipe to min 100 x 75

I am assuming that you maybe thinking of selling these once you have perfected it, looking promising

Totally AWESOME :2tsup: x 10

It may have been funny if the bastardised attempt to transpose from an obviously American joke and trying to make it an Australian one makes me cringe :D

Time to bring out the groan button again.................

Just a moment...

The set I had were timber handles

Dowidat Coffey Pty Ltd was the distributor of Toledo tools, was based at North Richmond NSW. In my apprenticeship i worked with a young carpenter whose mother worked at their factory and he got me a...

What they both said and in my experience of fixing hundreds of these the waterproofing has not been done correctly and the jamb and architrave MUST not be embedded in the tiles

A couple photos would be helpful please

May this year be a truly Blessed year to you, your family and friends

Interesting, never seen or heard of one before, wouldn't expect too much power from a 1/4" drill of that era

It was my personal opinion of Ikea and a failed attempt at humour.
Sand with a course wet and dry, spray with a primer, wait 48 hrs to cure properly, dry sand with medium to fine wet& dry then spray...

Simple, don't buy Ikea

Silicon or one of the Sika products will be the only 2 that will work given your specification. The enemy you have is the heat from the metal roof and the considerable expansion co efficient of the...

I've been following him for a while now, he makes some very impressive tools

Never was a truer word spoken in jest

I like them a lot but what worries me is the size of the rat trap and it appears you used the springs from them.......I'm not sure if I want to visit Tassi now.......:oo:

:2tsup: x 10
The lid is stunning

.....at the third stroke the time will be..ah bugger.....at the fourth stroke the time will be..ah bugger.....at the fifth.... bugger it, lets have a beer instead

You have certainly proved if a job is worth doing....do it well.....an awesome project you will never regret

That is no cheap project, looking good :2tsup:

No because at 1Pm the minute hand is at 12 and hour hand at 1 so when the minute hand moves to exactly the 1 position the hour hand has also moved proportionately past the 1