Search:

Sorry there's nothing new about this blade, in fact its as common as a English winter. Its available in either M2 (matrix) or (M42 COLBOLT)
which is available at any major saw supplier any where in...

Hi Martrix
Scarf joining of bandsaws has not been done for 20 years or more due to its high labor intense process. There are two types of butt welders

1) a butt welder which users basically...

HI Andrew
sorry for the delay i haven't had a chance to visit the site for a week or so.

75mm x 4mm x 3mt straight edge can be made, however it will have to be made from mild steel not hardened...

HI Lee

For cutting Hebel blocks on a bandsaw use 1/2" x 3tpi x T.C.T bandsaw.
or by hand with a T.C.T. Handsaw, you can even use a cheap harden tooth handsaw & throw it away every second day &...

HI Andrew
sorry for the delay i haven't had a chance to visit the site for a week or so.

75mm x 4mm x 3mt straight edge can be made, however it will have to be made from mild steel not hardened...

Hi Andrew

13g = 2.41mm but as i have stated we can make NEARLY any thing.

Australia post not happy to give me a price, So i'll get a quote from Ipex who handle our bulk freight.
...

Hi Minimania

If you get a chance give me a call at HBsaws on 029 627 5486, We may have a solution for you .

Brad !!!

Hi Tim
Please understand that we supply bandsaws & other products to most of the machinery dealers from time to time so we cannot be seen to favour one over the other (sorry). However i did point...

Hi Michael

Yes there are 1/4" Bi-metals but for cutting steel only, they will cut
timber but not real well as they have a different tooth design.


Brad

Hi Michael
The thickness would be 0.025" , the set would be not much more then, lets say 0.015" to 0.020" to big for puzzles, we can supply 0.014" bandsaw blade but i wouldn't recommend it on a 18"...

Brad,

pardon my ignorance but how thick is 13 gauge? Use will be for general boatbuilding use not precision engineering.

Andrew[/quote]


Hi Andrew

13g = 2.41mm but as i have stated...

Thanks for that, Yep its not bad.

You blokes won't it all in one !!! --------- I'm thinking :cool:

300mm (12") x 48T will give you the best of both worlds.

Doc

P.S. No difference...

Hi Bodgy

At this stage i wouldn't go hacking into your machine, you may have to later but lets try a few things first, your problem is not uncommon & termite may have come close to the problem (...

Hi Andrew

Standard size over that length would be 3mt x 100mm x 13g
However this depends on what you wish to use it for. (more info please)
as we can make whatever you wish.

Tolerance-...

OK,OK, Thanks gents for pointing out my mistake, & i do apologize to Steve or Alf, (sorry just joking) & i'm happy to cop it on the chin & move on... (i'm still wearing my L plates when it comes to...

Hi Alf

1/2 x 2tpi - $25.00 +gst
1/2" x 3tpi w/c bi-metal $45.00 + gst
post $ 8.00 + gst

Hi Alf

Yes we do have 1-1/2" & 1-1/4" pitch blades, but saddly not in 1/2" wide.
We do have a 1/2" x 2tpi this blade was designed for deep bowl blake turning & can turn down to a 2-1/2" circle &...

Alf

What size machine do you have ???

Doc

Hi Auld

Again to many teeth

Recommend 3/4" x 1.25p 25.00 + post + gst
High pitch sound.. To many teeth in the cut or blade speed to fast
producing high frequency...

Hi Paul

You can give it more tension but if its working fine, "if it ant broke dont try & fix it" However you can give it more strain it wont harm the blade..

Double sided paralel straight edges

Sorry my mistate, should bring more paper work home with me instead of going on my memory.

300mm $25.00 + gst
1000mm $80.00 + gst

Doc

Spec's

1/2" wide Max
Lenght 9'-8"

Would recommend 1/2" x 3 tpi or 1/2" x 2tpi
sorry not much choice because of the machine

Doc

1) Furphy, Con Job!!!, OK if your happy with MINIMAL BREAK OUT on the underside of the sheet then so be it, however with our customers its zero break out, Nothing less.

2) Yes the rest of the...

The spec's For a Nolex junior i have at work not with me at home at the moment. But they can only take a 1/2" blade from memory,will confirm.
Depending on what you wish to cut there not the most...

Your wright, the message was intended for Mick but i'm still trying to nav my way around this site, But i was getting to you next.

Not a furphy as you say just general rule & some years of experience,
However your machine must be in perfect alinement with no bearing
problems, Thats good. consider yourself in the few, As for...

OK, you have the special guide system good, A 14" jet machine has a standard 7'-9" blade so a standard riser block is 6" so your new blade lenght will be 8'-9" SO. If your supplier cant supply you we...

Hi Kev
The blades which came with the machine are proberly the originals,
they would have been made by portamill in Queensland who also made
the Dynasaw machine some years ago. The blades are...

Yes their is a slight difference between the blades depending on the manufacturer.
Meat blades are generally thinner around 0.020, 0.022 in stead of
0.025 which is normal guage, With a slightly...

Please bear in mine the yanks nor the euro's don't have what we call hardwood !! they don't even no the meaning of real hardwood.
Australian hardwood exsplodes up to 4 x its chip size in the cut...

God, How longs a peice of string ???
Sorry too many questions in one.

You have, spring steel blades- No longer used
Harden carbon- most common
stellite tipped- used mainly for resaw & log...

Just give us a call.. 029627 5486..

Yep, Your wright, however i don't mind but please bear with me as i'm trying to work my way around this site & i will not be able to respond
to every one each nite, mine you its now 1.44am..
...

Hi Mick
It would be better if you rang us, Guys i have no problem quoting prices
however we stock many different blades for many different reasons,
And you should always use a triple chip for...

1) They start from $40.00 depending on size anything up to 3.600 mts

2) Depends on your guide system, Snap NO, Holding it straight needs
a special guide system.

Hi all
My names Brad from Henry Bros Saws, I'm here to help in any way i can
regarding bandsaws, circularsaws, knives & routers. Just ask & i'll do my
best to help you....

Henry Bros Saws ...