Search:

BobL,

Thanks for that, looks like a pretty simple setup to make.

I run Stihl bar oil in the saw, but was thinking of running sump oil / used hydraulic oil in the auxiliary oiler? What are your...

Hi all,

I was chasing ideas for any home-made auxiliary bar oiler setups that any of you guys may have fabricated? I am running an MS880 for slabbing and need the extra lubrication. Using a hard...

BobL,

Cheers mate, your input is appreciated.

Matt

BobL,

Thanks for the info mate, very much appreciated. I will have a look online and see what I can find.

Regards,

Matt

Hi people,

I was chasing the tuning specs and procedures for the 880? A few threads on the Stateside forums are a good read but I suspect that the colder climate there would mean different tuning...

Hi fellas,

Was wondering where to get hold of a wireless tacho to check engine RPM on my saws?

Also, what brands good? And what brands to avoid?

Cheers...

Matt

I will get some pics up once I bring some timber back to the house.

Matt

Hi all,<br><br>I have some good stands of Queensland Rosewood on my block which I want to see whether there is a market for. Most of it is dead standing timber that has died over the years but not...

Dai sensei,

What chain do u go for? Stihl? Carlton?

I have mainly used Stihl chain, however am willing to give something else a go if it is any good.

Matt

Dai Senei,

Yep, drilling the bar is definitely the best way to go for sure as far as the mounting goes. I had previously set a milling attachment on the 660 with holes drilled in the bar but i ran...

Hi BobL,

Thanks for the input mate but I reckon I have the saw cutting ok as it is, for how I use it anyways. I use the same B&C combo for ripping split posts (ironbark) as for when slabbing...

https://www.woodworkforums.com/attachment.php?attachmentid=423960&d=1510111194&thumb=1&stc=1https://www.woodworkforums.com/attachment.php?attachmentid=423956&d=1510111122&thumb=1&stc=1http://www.woodwor...

BobL,

I ended up getting a set Stateside, half the price that I could score a set in Oz so thanks for that.

They look like they will do the job, that is for sure.

Matt

BobL,

Who did ou buy the chaps Labonville thru mate? I have tried a couple of places but they won't ship to Australia?

Cheers,

Matt

Hi fellas,

I am looking at finally getting a set of leggings, plus a hard hat / visor setup to wear out in the scrub. I have been getting away without these for years but the missus has put her...

Where about are you mate?

Hi, Matt here...

I was looking at fabricating my own CS milling attachment so I can cut a few slabs of my own. I haven't seen any working in the flesh, all I can go off is drawings online that a...

sorry fellas!!! i meant 30mm!!!!

Hi people, my father in law has dropped of a BV-25B-L lathe at my workshop, 300mm spindle bore, 700mm between centres. Anyone know much about these lathes, who manufactures them, where to get parts...

Hi people, I am a newbie from sunny coast in queensland. Hope you all are doing ok. Looking forward to learning some things from the site, as well as contributing when ever I can. Looks like a great...