Search:

There’s a timber and hardware near to me that has their timber prices online. Not a huge range but the quality is good.

Heres a link.

NS Timber and Hardware

I used some 150mm PVC pipe, a wooden inner and outer former and a heat gun. The pipe was fitted to the inside of the outer former which became the base to connect to the extractor
...

Reading this, if I had a DE connected to one machine, with a flow of 400cfm, plus shed forced venting, that would be acceptable. Interesting.

Welcome to the forum.
The main question is how deep is the burn? This will determine whether it’s a cover-up or repair job.

Just wondering how the Workbee is going?

How can you decide whether to answer a post, or not, unless you view it first?
Heading was “Axiom in Brisbane?” which could have multiple meanings so one would need to view the post to see what was...

I’m still thinking about buying a CNC unit, so a build, warts and all, would be appreciated :2tsup:

Email reply from Bondall re Multi-surface Water-proofing coating.
”re coat if brickwork goes dark or if the water stops beading”.

Don’t know. There is no mention of recoating after a time period. I guess it’s just a matter of - if it stops beading, put on another coat?

I’ll email them and ask and get back to this thread.

On recommendations from a company that specialised in waterproofing, we used this product on a brick wall section of our house that is double brick but with no cavity. There are also no eaves so it...

Which Polyurethane do you use Peter?
Thanks.

I’m with Jonsey850.
I bought an igaging digital read out ( at full price) that turned out to be faulty. They replaced it (thanks Timbercon:2tsup:) but the replacement got damaged in the mail. They...

Excellent work - as usual :2tsup:

How does the book stand attach to the top ?

Is the “open look” of the book rest a change in design?

I thought 1000pa = 4.01865 in H2O?

dmorse beat me to it😳

BobL is spot on re filters that are lightly soiled filtering better than new filters. On excavators the service manuals often state, re...

On our Tung oiled floor boards we use a product called Gemini Satin Timber Floor Polish. Goes on with a mop. Not sure if it would go over the linseed/turps mix but as long as it’s soaked in I can’t...

To echo the words of one of my ex students “ it’s looking smick Sir”

Have you looked at the Manuals section of this forum?

Durden Pacemaker SP10-600, UP10-600 and UP12-600 manuals

not sure if this is your unit?

Have you tried a pin nailer for the trim on the FRG?
Re your sapele ply - did you acquire that from Plyco? I’m looking to purchase some oak ply and looking for a quality source.

Interesting article pointing to problems with the uptake success of solar in certain emergencies.

Power granted to switch off household solar in SA to prevent statewide blackout - ABC News

One problem with a sander maybe that the knot is harder than the surrounding timber so when you belt sand it, it can remove surrounding timber and leave the knot proud.

BobL kindly made me 150mm and 100mm BMHs for a modest price. I use the 150mm one on my SCMS and the 100mm one on my drill press.

additional info:

Chris Parks also posted re having BMH being...

It certainly was good value but unfortunately it has been withdrawn from sale.

My comment wasn’t directed at your or your comment intentionally but to the term “scary sharp” that’s been used for on many forums for years.

The bottom has two pieces of timber that sit tightly against each side of the body (two red arrows) then there is a piece of timber across the top (one red arrow) that has been height sized so when...

Thanks for this thread Bushmiller. Just a question.
Maybe I’m reading it wrong but I can’t see $-190 for SA? I see $190. Does the fact that it’s in brackets mean it’s a negative figure?

There’s a “bridge” that sits under the belt assembly. The pivot heights are adjustable to get the angle in the ball park when initially setting up.

490964

A rod is placed through the pivots
...

I bought a Veritas Sharpening guide, a selection of diamond plates off eBay and a green honing paste block from Bunnings.
Maybe not as “scary sharp” as some would like but my planes take thin...

All photos on earlier threads got lost.

I made this one from merbau.

490931

I’m sure I have the plans somewhere. I’ll have a search if you are interested

There have been houses sold that advertise these features as selling points. As to passwords etc. these could be changed to something generic before selling and passed on to the new owners

I took a different approach by mounting the separator and filter directly to the drum. As I no longer need the three legs to hold the separator up, I mounted the separator to the lid and held it down...

I was thinking something like a solder station fume extractor but they are expensive.

I found this which I thought was interesting and inventive.

Safety first! How to make a solder fume...

I read that as inside 10.6 and outside 12.0.

Thanks for the write up. Looks like a useful bit of kit.

All your requests up to asking about a 50/50mix of varnish and turps were answered, including links. Maybe no one had thoughts on the 50/50 mix which is why you didn’t get an answer.

I’ve got this one coming down in 6 weeks - kaffir plum

490735 490734

apparently the timber is not much use - shame.

I’m not sure that they are available in Australia but reviews seem to rate then highly for model work.
Welcome to the forum.

That’s similar to my PC virus protection software. I’ve been with them for years but it’s about 1/3rd cheaper to buy a new install every year rather than pay their renewal fee. I asked them once and...

While ethanol has a higher octane rating than petroleum, its energy rating is less therefore you need to use more. In the old days of carbies, we just drilled out the jets.
Flex fuel vehicles...

So we want people to buy electrical vehicles so we wack another tax on top?
One of the problems re electric vehicle in some OZ States and Territories is there is no incentive to buy them, like in...

Thanks. I’ve seen the water based on Amazon from an Aussie supplier, hence the question. Thinking of giving it a try.

Was the Minmax everyone used water based or hydrocarbon solvent based?

Dont recall anyone abandoning ship in NSW?

I use roller supports on the inlet side and outlet side, adjusted slightly high and about 600mm to 1m away from the thicknesses tables, when thicknessing long lengths. Minimal if any snipe.

Probably a lot of members are familiar with this site but for those who are not I’ll add this link.

Green Vehicle Guide Home

Interesting information on specific vehicle CO2 emissions, L/100km,...

I have bought parts from ereplacementparts before if that helps.

I had my original rubber type come off the lower wheel but not the urethane one so I really can’t answer why unless they were over stretched?
At $15 each they were incredibly cheap for urethane...

Quite strange. Erplacementparts on one part of their website says it’s on back order, available 3/9/2021 as Treecycle posted but when you go via the parts diagram and list it says it’s obsolete - not...

Doesn’t export to Australia - according to the red writing.

That was incredible. Thanks for sharing, which is now what I will do.

Have you tried their Creative Cloud Cleaner?

Use the Adobe Creative Cloud Cleaner Tool to solve installation problems

Just looking for similar problems during a search. Seems to a relatively...