Search:

Sorry but it 's gone. I should have updated the listing.

Col.

Done. No longer for sale here.

Col.

It's too fragile and too many bits to send over to WA. I am sorry but for me it is too risky.

Sent from my INE-LX2 using Tapatalk

How about $600. I need it gone. There must be a clock maker out there. This is well below replacement value.

Col

Hi all.


Some time ago I purchased the clock mechanism, hardware and plans off a forum member. It is a Keininger mechanism and plans for a Grandmother clock. Three weights. Sun - Moon dial. Brass...

Hi all.

Some time ago I purchased the clock mechanism, hardware and plans off a forum member. It is a Keininger mechanism and plans for a Grandmother clock. Three weights. Sun - Moon dial. Brass...

I am glad you did because I just copped some major flack. And, as an aside, I did not offer or negotiate a price behind the scenes. I merely asked the question if the price was negotiable. With...

My theory is that it is easier to ask for forgiveness than for permission, seeing she works and I don't.....

Also being open, I messaged Ben to ask if his price was negotiable. His answer with a lower price is above and now I will make it like a reverse auction and am prepared to pay $400 for the squares...

PM sent

Col in Lara.

The Makita I bought is Chinese but seems to work well and all angles are accurate. Time will tell if that lasts. Everything seems to be Chinese these days. As for routers I have two large and two...

hahahahahaha I know how you feel. I bought one of those useless Triton routers and it fell against the sledge hammer quite a few times. I too had the Bosch SCMS and it went to god. I bought a kapex...

Sold and gone to a good home.

Thanks.................

Pending.

I still have this for sale for $120 or near offer.

No posting due to weight and size. We can arrange a meet up or it can be collected in Lara. Vic. or buyer can arrange transport.

Col.

Stanley 4 1/2. Australian made. Good clean usable condition. $70.00 SOLD
Sargent 6. Rough condition and needing a restoration or for parts. Missing bits and has hole in sole under front knob. $10.00...

Saw is still for sale.

$120 is the lowest I will take for a quick sale.

No shipping or posting. It is too big and heavy. Pick up from Lara or we may arrange a meet etc..

Col

I'm not trying to make a fortune but clearing unwanted items. It will be $80.00 including postage if you like.

Send an email with your details and I will send the bank details back. If someone is...

I will do it for $45.00 posted. Message sent.

Message sent.

Selling the following items.

Stanley 4 1/2. Australian made. Good clean usable condition. $70.00
Sargent 6. Rough condition and needing a restoration or for parts. Missing bits and has hole in...

Selling a Stanley Number 60 cast iron mitre box with 600mm back saw. Saw is straight and sharp. I re-lacquered the handle and cleaned the surface rust and grime from the blade to make it a bit more...

I was happy to donate the square as over the years I have sold lots of items through the Forum marketplace and thought I would give something back. I'm glad the square went to a good home. Hopefully...

Well done Crowie. I was glad to donate it and hope you put it to good use.

Regards Col from Lara. Vic

I'm in

OK That sounds good. I thought that he would be able to sort any problem you might have.

Col

To be honest. It does not need any adjustment at all out of the box. I just went through the motions to see if it could be done. I like to get rid of sharp edges on planes. Lie Nielsen and all. Stops...

After putting it all together and adjusting blade out and closing mouth to minimum with brass adjuster in place, I have less than 1mm opening which for me is good enough not to fiddle any more. Plane...

I was too hasty. By filing the oval hole the mouth closes more BUT.... There had to be a but. The brass adjuster slot still does not allow the adjuater to move far enough to close the mouth so a...

Filed and the mouth can adjust less than 1 mm now if you need to less of course with blade protruding. Problem solved.https://uploads.tapatalk-cdn.com/20180930/718d855e546b6ce71f68750679fd385c.jpg
...

No it isnt the brass at all. I took mine apart and there is a bit of rough cast where screwdriver is pointing in the oval hole. I will file it round so the mouth plate can close...

I would think the round edge where screwdriver is pointing needs 1-2 mm off to let it get closer to the cast edge.https://uploads.tapatalk-cdn.com/20180930/5178dfa391ce86f8cb58e68b281b1c9a.jpg
...

When you need it closed further. Remove the brass adjuster, replace with a suitable size washer and adjust by hand or file the side of the adjuster so it moves across further. Just modify to suit...

I have the minimum and max as per photos. It could possibly close to zero with some fiddling. I bought one of his 90 degree scraping blades for it at the Melb woodwork show but have not tried it yet....

Bugger.
Well done winner and thanks donor.

Col.

I didn't do any work on the Yarra. I did on the Stuart, Parramatta and maybe the Swan. Also the Cook but that was a bit of a lemon. That would have been Maribrynong where you stayed. Lots of Dept of...

That was me that mentioned parking out the back. My mate has the disabled parking permit and cannot walk far and I was talking to someone there and was told I could have parked out the back on the...

Well I ended up going and dragging an old Dockyards Joiner mate along with me. Dropped him at the door to get the tickets and parked way up the street near the station as all parks close by were 2...

Without coating machinists blue all over it I wouldn't be able to tell you if the sole is dead flat but for woodwork purposes it is machined well. It is weighty and feels and planes as I would have...

I have one. Certificate Number 9 out of the first 40.

All of my other many planes are Lie Nielsen and I intended buying a Lie Nielsen low angle jack. Henry Eckerts were selling a used Lie Nielsen...

I'm in

Most likely but a typo does not help his cause especially with the costs involved for him to come all the way to show his stuff. Here is a link to the plane I bought.
...

Henry Eckert Tools from Adelaide will be there but they are not even listed. I have spent my show money on the recently released Henry Eckert low angle jack plane. Fantastic. If you are going to the...

I agree and I have decided that I am not going either. I had saved a few dollars to spend at the show but spent it today on some other items instead.

Col

Has anyone got a list of who and what is on at the show yet?

I have been sent a few emails to buy tickets with the attached blurb saying an exhibitor list will be available closer to the show...

Sent you a PM

Col

I agree. I have made scratch blocks in the past or used the Stanley 45 to get suitable profiles on furniture repairs so I thought I would finally get the Lie Nielsen version after procrastinating for...

The Lie Nielsen beader arrived this morning. 11 days from order to getting it. With exchange rate and foreign exchange fee from NAB it ended costing $240.43 for the tool, $42.59 for the postage and...

Maybe post it in the wanted section and you might be luckier.

Col.

Once upon a time I would have dug deeper into my pocket to get it from an Australian supplier but the cash is a bit light on since leaving full time employment so I have to search out a few better...