Search:

Type: Posts; User: riverbuilder

Page 1 of 22 1 2 3 4

Search: Search took 0.04 seconds.

  1. Replies
    44
    Views
    1,133

    Damn these ipad things I need lessons on how to...

    Damn these ipad things I need lessons on how to paste links, anyway, they are a solid cutter with a replaceable insert system, using a small torx head screw. Quick and simple and very cost effective.
  2. Replies
    44
    Views
    1,133

    While talking about economics of cutting tools....

    While talking about economics of cutting tools. Iíve found these Router Cutter Bits and Accessories Online in Australia - DIMAR. To be very very good. They cost on average about $100 initially, but,...
  3. Replies
    7
    Views
    231

    Unless the blade is kinked or buckled noticeably,...

    Unless the blade is kinked or buckled noticeably, the blade is saveable.( is that even a word?) If the individual teeth are damged or bent, I’ve just ground them off with a dremel type tool before,...
  4. If you have a 1/2Ē 2 hp router and some timber...

    If you have a 1/2Ē 2 hp router and some timber you can buy a cutter and make a sled in about an hour and do it yourself.
  5. Replies
    1
    Views
    243

    Full garage setup for sale in NSW

    Thereís a LOT of gear in this listing, probably more than the average hobbyist would need to start, but thereís some good stuff there too, including a powermatic tablesaw,a bandsaw, and a helical...
  6. Replies
    11
    Views
    306

    N.S.W. Iíll take them at $150 and pick up next week if...

    Iíll take them at $150 and pick up next week if you like.
  7. Replies
    11
    Views
    306

    N.S.W. funnily enough I saw that on your profile, but...

    funnily enough I saw that on your profile, but Sydney is a big place, with lots of suburbs, many of which I visit frequently. Which one would the tools be in?
  8. Replies
    11
    Views
    306

    N.S.W. Where are they located?

    Where are they located?
  9. Replies
    4
    Views
    262

    Iím going all in and calling it for Sumatran Teak.

    Iím going all in and calling it for Sumatran Teak.
  10. Replies
    13
    Views
    274

    Get some Bond crete (or PVA glue) and mix it with...

    Get some Bond crete (or PVA glue) and mix it with a tiny bit of water to thin it, then paint it around the outlet and the grout. Do all the grout because it could be tracking from anywhere. Or...
  11. That Clubsport is worth at least $45k, my...

    That Clubsport is worth at least $45k, my mechanic mate just found one, in a garage, washed it and put two new tyres on it and sold it within 3 days for $53,000.
    He uses Shannonís for insuring all...
  12. Replies
    8
    Views
    340

    I’m talking about standard, 26” long, 6 teeth per...

    I’m talking about standard, 26” long, 6 teeth per inch, panel saws, driven by arm power. I know how to set them and what to use, but the size of the kerf produced, is there a standard for it? For...
  13. Replies
    8
    Views
    340

    Setting a handsaw

    How much set is too much set?
    As far as I can remember, all the old man did was set a saw, cut across a board about an inch, and rattle the saw back and forth. Is this adequate? Is there any...
  14. Replies
    44
    Views
    1,133

    For something that’s spinning at 18,000 RPM, I...

    For something that’s spinning at 18,000 RPM, I like to have the best quality bitand as sharp as possible.
    Dimar
    Carbitool
    Torquata
    CMT orange.

    Never had one let go in 40 plus years of using...
  15. Replies
    7
    Views
    525

    QUEENSLAND Yeah thatís nice. 👌

    Yeah thatís nice. 👌
  16. Replies
    26
    Views
    716

    Just buy blades that are slightly thicker than...

    Just buy blades that are slightly thicker than your riving knife, it will be easier than trying to buy another riving knife. A rip blade, in 300 diameter, should be around 24 teeth maximum. Set it as...
  17. Replies
    26
    Views
    716

    Just buy blades that are slightly thicker than...

    Just buy blades that are slightly thicker than your riving knife, it will be easier than trying to buy another riving knife. A rip blade, in 300 diameter, should be around 24 teeth maximum. Set it as...
  18. Replies
    26
    Views
    716

    If you fit a thin kerf then you need a thinner...

    If you fit a thin kerf then you need a thinner riving knife to suit.
    also you need to have the blade fully up for ripping 2Ē thick stock, the saw wonít be working as hard as there is less tooth...
  19. Replies
    41
    Views
    1,259

    I didnít ďhearĒ it at all. I was running a...

    I didnít ďhearĒ it at all. I was running a workshop which had the inspectors come from Worksafe Australia and they slapped a notice of desist on a couple of machines, one of which was the radial arm...
  20. Replies
    41
    Views
    1,259

    In the commercial woodworking field, these saws...

    In the commercial woodworking field, these saws have been banned and their use abolished for quite some time.
  21. you can make a manifold box with gates for each...

    you can make a manifold box with gates for each machine in it quite easily, I think Iíve seen pictures of derekcohenís one on here, looks good and easy to do.
  22. You can hire these cheaply at places like...

    You can hire these cheaply at places like Kennards.
  23. Replies
    9
    Views
    503

    SOLD: Take it to the local mens shed, thereís bound to...

    Take it to the local mens shed, thereís bound to be someone there who will get it going snd be able to onsell it. Looks in great condition considering itís probably 50 years old. There will be...
  24. If youíre going to machine them flat with a...

    If youíre going to machine them flat with a router, all youíll need afterwards is a belt sander and a random orbital or a cabinet scraper.
    Most of the time, with big, heavy lumps of wood, like slabs...
  25. Even if you bought it for , say,$700, and then...

    Even if you bought it for , say,$700, and then spent $1000 on a spiral head, it’s still going to be 5 times the machine you’ll buy from Carbatec or wherever for $4000, far, far better.
  26. Replies
    87
    Views
    2,240

    This is the best thread I’ve read through in...

    This is the best thread I’ve read through in ages, well done all of you.

    Now, I know there will be lots of rolling eyes here, can someone please show me the exact difference between a scrub plane...
  27. Replies
    25
    Views
    705

    They’re fine as long as you paint them well...

    They’re fine as long as you paint them well according to directions and paint seal all cut outs, ends, and bolt holes.
  28. Agree with rustynail, use the stroke sander,...

    Agree with rustynail, use the stroke sander, trying to put a big heavy slab through a drum sander is asking for pain.
  29. Replies
    9
    Views
    533

    Road Trip Bernmc? We can take my ute 😆

    Road Trip Bernmc? We can take my ute 😆
  30. There’s an excellent durden three phase machine...

    There’s an excellent durden three phase machine on Facebook marketplace at present, solid as a rock and will outlast you.
  31. A freind of mine has a contract to trap them at...

    A freind of mine has a contract to trap them at public schools. He leaves the trap open for a few days to let them get used to coming and going, then closes the exit so they can only come in, but...
  32. Replies
    0
    Views
    172

    Sliding table saw in Sydney

    Good little garage size sliding table saw in Sydney for sale looks brand new, a bargain for a clever deal
    Panel saw Only selling due to storage issues.(near new) | Power Tools | Gumtree Australia...
  33. Replies
    9
    Views
    533

    Now Reduced

    Just noticed itís been reduced to $8750, might be time to make a realistic offer if youíre in the market for one, looks a good tidy unit.
  34. Replies
    4
    Views
    415

    VICTORIA Would you consider $90 plus postage to 2082 NSW?

    Would you consider $90 plus postage to 2082 NSW?
  35. SOLD: I would imagine that ,to a collector, it would be...

    I would imagine that ,to a collector, it would be worth considerably more than the asking price. Dave Stanton who works at Carbatec collects Turners, he would know.
  36. Replies
    19
    Views
    649

    Iím dead certain, itís raw boards, sitting on the...

    Iím dead certain, itís raw boards, sitting on the back of the ute which it was transported in, it will get turned into something that gets polished or oiled one day, along with the almost 1 tonne of...
  37. I too just gave an old 24Ē saw a birthday, this...

    I too just gave an old 24Ē saw a birthday, this is the blade guides I made for it, they work perfectly well. You donít need to look for original manufacture parts, the bearings are generic and...
  38. Thread: Battens

    by riverbuilder
    Replies
    5
    Views
    237

    I use 40x 18 hardwood which has a rounded over...

    I use 40x 18 hardwood which has a rounded over edge profile and put one stainless decking screw in them into treated pine framing, stain or paint the edge of the framework first and it comes up a...
  39. Replies
    19
    Views
    649

    This is Jarrah.

    This is Jarrah.
  40. Wear disposable latex gloves when using this...

    Wear disposable latex gloves when using this glue, for obvious reasons.
  41. Replies
    8
    Views
    649

    Polyurethane glue catalyses with the moisture in...

    Polyurethane glue catalyses with the moisture in the air, if you could store it in a vacuum it would keep forever, but once it’s exposed to air, and therefore moisture, the process starts. I have...
  42. WEST AUST Nice gear, someone should buy them purely for the...

    Nice gear, someone should buy them purely for the bling factor, I would imagine they cut as good as they look.
  43. Replies
    2
    Views
    209

    FREE: NSW The moth association is looking for early boats,...

    The moth association is looking for early boats, I think I saw an ad in Afloat or somewhere, maybe Google them up?
  44. Replies
    0
    Views
    153

    Wadkin table saw, NSW.

    I know these are popular, seems a nice solid unit in good condition too.
    Table Saw 10? - Tables - Katoomba, New South Wales | Facebook Marketplace
  45. Replies
    19
    Views
    649

    Merbau

    Merbau
  46. Replies
    0
    Views
    144

    FREE: NSW 210 (8Ē) saw blades

    Three saw blades have not much use came off a deWalt mitre saw, 30 mm bore so can be bushed to whatever you need. a 30 tooth, 60 tooth negative rake, and an 80 tooth negative rake. Plenty of...
  47. Replies
    52
    Views
    1,406

    Link please?

    Link please?
  48. Turn the chuck around ? Did it have an adaptor...

    Turn the chuck around ?
    Did it have an adaptor to change it down from M3 to M2 and it's fallen off?
  49. Replies
    30
    Views
    959

    the old man just used to measure the overall...

    the old man just used to measure the overall diameter, as long as you measure the same on both should be close enough give or take a few RPM's
  50. Replies
    5
    Views
    265

    Table saw or sliding table saw. take a piece...

    Table saw or sliding table saw.

    take a piece of board about 100 mm wide and trim it on the fence
    turn the saw off and move the fence towards the saw so the edge of the board lines up with the...
Results 1 to 50 of 1056
Page 1 of 22 1 2 3 4