Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: triton router fence
-
7th May 2003, 04:28 AM #1
triton router fence
My triton router came with a separate base plate and a sliding fence attachment for hand held use.
Have any triton users attempted to fit a second fence to this base plate thereby making it seem possible to have a ready made jig to rout out mortices?
If so would triton supply additional fences to make this operation easily available, and what is the cost of this accessory.woody U.K.
"Common looking people are the best in the world: that is the reason the Lord makes so many of them." ~ Abraham Lincoln
-
7th May 2003 04:28 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th May 2003, 10:04 AM #2
Absolutely! Quick release jigs are a favourite of mine. If you buy the upgrade to the triton table (which is the quick release plate), which costs all of $A 7, you can fit them to each of your jigs, making them all quick release
(ps- hopefully, you can source this upgrade over there!)
-
15th May 2003, 04:15 AM #3
Are we talking about the same fence.
Please see attached zipped picture fence is marked with tick and cross.woody U.K.
"Common looking people are the best in the world: that is the reason the Lord makes so many of them." ~ Abraham Lincoln
-
15th May 2003, 10:30 AM #4
Yes, and no!
I haven't attempted to add a second fence to the underside of that Triton-supplied jig, but instead was suggesting that you can make up one specific to the task & use the quick-release plate to make it easy to swap between jigs.
Sorry about the confusion.