Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Vicmarc VL200 LONG SM EVS
-
9th September 2010, 09:12 PM #1
Vicmarc VL200 LONG SM EVS
Vicmarc VL200 Long Bed Stand Mount Electronic Variable Speed
Based on the Original VL200 with a couple of changes.
The stand is made out of 3mm steel as against the normal 5mm which helps trim the weight from around 300kg down to 215kg. Still a heafty weight.
The electronics are the same type as used in the VL100 lathe.
With these 2 changes it has brought the price down to a respectable $4290.00
Have a look here for more info and place your orderJim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
9th September 2010 09:12 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
12th September 2010, 10:38 AM #2Member
- Join Date
- Apr 2006
- Location
- Newcastle
- Posts
- 91
Hi Jim,
I already have the VL200.
With the change to the VL100 electonics reducing the price,
How much would it now cost to supply an EVS setup to my existing VL200
Cheers
Steve
-
13th September 2010, 08:15 PM #3
Vicmarc VL200 EVS
Steve had to check this out and you would be looking at $1380.00 for the motor and electronics.
Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
Similar Threads
-
Vicmarc VL200 on e-pay
By Enfield Guy in forum WOODTURNING - GENERALReplies: 6Last Post: 13th March 2010, 12:54 PM -
Vicmarc VL200 on Ebay
By Poloris in forum WOODTURNING - GENERALReplies: 72Last Post: 27th January 2010, 10:36 AM -
Vicmarc VL200 lathe for sale in Vic
By NeilS in forum WOODTURNING - GENERALReplies: 1Last Post: 11th November 2008, 11:59 AM