Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 13 of 13
Thread: Wood Sealer
-
29th July 2011, 02:35 PM #1
Wood Sealer
Does anyone know if there is a similar product to BP Log End Sealer or Mobil Mobilcer m/c (195) as these two products aren't made anymore. I know you can get small amounts of wood sealer like End Check? but this works out too expensive.
-
29th July 2011 02:35 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th July 2011, 03:07 PM #2GOLD MEMBER
- Join Date
- Sep 2008
- Location
- North Carolina, USA
- Posts
- 2,327
I was in a fancy wood working shop several years ago reading the label on expensive wood sealer. An employee asked if he could help. I asked it the wood sealer worked any better than left over latex paint. He looked around and quietly said he used latex. I have seen a lot of blanks dipped in paraffin wax here. It is what we use to seal jelly jars. I think paraffin to the Brits is what we call kerosine.
I have used latex, roughed out green bowls and slathered with boiled linseed oil, soaked roughed out bowls in hand dish washing liquid, wrapped roughed bowls in many layers of news paper, some cracked and some didn't.
Logs for bowls I cut twice as long as the diameter, split in half and stack outside in mostly shade, flat side down on a pallet off the ground. In 6 months, a year, two years, I cut off the cracked ends and rough out a bowl. Some crack and some don't.So much timber, so little time.
Paul
-
29th July 2011, 05:29 PM #3
I have a couple of home made solutions. The first one is styrafoam melted with turps or similar into a thin paste or thickish soup. Then there is the latex paint into this a mix 1/2 litre of cheap PVA glue. This gives it good stickability and thickens it up as well. I use both for log ends and large blanks.
I use cheap ceiling paint from Bunnies $14 per 4 litres and another $5 for the PVA. Both work well and have been using them for quite a while now.Inspiration exists, but it has to find you working. — Pablo Picasso
-
29th July 2011, 10:13 PM #4
I've got half a drum of Mobilcer here that I'll never use if you want to take a short drive to pick it up - gave up on the stuff Found most species around here still cracked anyway and the stain it left in the timber spoilt a few otherwise good blanks. These days I use nothing but a parrafin wax/beeswax mixture in an old electric frypan -
-
29th July 2011, 10:20 PM #5
I've found that the latex paint needs re-coating every few months. Sometimes available free from hazardous waste disposal, so the price is right.
Wax works nicely, either dipped (for small logs), or brushed on if the log won't fit in the pan. I think almost any solid wax will work - canning supplies from supermarkets, surplus candles (garage sales?), etc.
Our WT club proprietor buys AnchorSeal in 55-gallon drums, sells to members at cost; 5-gallon bucket included, decant into a jug. It's a wax and water emulsion, brushed on with water cleanup. Need to shake the jug (and the bucket) to re-mix after it sits for a while.
Cheers,
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
29th July 2011, 11:02 PM #6
-
30th July 2011, 12:19 AM #7
Caltex have one. Called Timber Sealer
-
2nd August 2011, 07:33 PM #8
-
2nd August 2011, 08:34 PM #9Senior Member
- Join Date
- Jun 2008
- Location
- Broken Hill
- Posts
- 308
Was it expensive?
Three wise middle aged monkeys - "see no pot-belly, feel no bald spot, buy no sports car"
-
2nd August 2011, 09:03 PM #10
-
2nd August 2011, 10:02 PM #11
Not bad, I bought 20L (20Kg) 7 or 8 years ago & it cost $75 then.
Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
3rd August 2011, 05:18 PM #12[found that the latex paint needs re-coating every few months. Sometimes available free from hazardous waste disposal, so the price is right.
Joe,
Yeah it does a bit thats why I put the PVA glue in to try and stop that happening, seems to work. I got the tip from a friend who makes billiard tables. They seal thier timber stock with watered down PVA glue.Inspiration exists, but it has to find you working. — Pablo Picasso
-
4th August 2011, 05:49 AM #13
We're happy to call it Paraffin or Kerosene but what you are talking about is the wax candles (not bee's wax) are made from.
I have an old roasting tray half full of SWMBO's smelly candle leftovers. The scent does not seem to affect the wood but the wax seals it just fine.Dragonfly
No-one suspects the dragonfly!
Similar Threads
-
Caltex wood sealer?
By movay_2008 in forum WOODWORK - GENERALReplies: 5Last Post: 17th January 2011, 07:38 PM -
Sealer
By morrie in forum FINISHINGReplies: 6Last Post: 15th September 2010, 11:17 PM -
Ubeaut Sanding Sealer vs Stewmac sanding sealer
By gbx78 in forum MUSICAL INSTRUMENTSReplies: 20Last Post: 19th August 2008, 02:57 PM -
Sealer for MDF
By Mick4412 in forum FINISHINGReplies: 8Last Post: 5th September 2005, 11:30 PM -
Sanding Sealer or Grain Sealer
By Strungout in forum FINISHINGReplies: 3Last Post: 4th October 2004, 12:03 PM