Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: Bodgers Kit
-
18th October 2005, 12:50 AM #1Senior Member
- Join Date
- Nov 2004
- Location
- Holland Park, Brisbane QLD
- Age
- 48
- Posts
- 361
Bodgers Kit
Hi All,
I am tempted to put together a "typical" bodgers kit. Looking at just the basics that would have traditionally been carried into the forest on the bodgers back.
Some of the obvious items are: froe, axe/ hatchet, chisels, adze, and drawknife.
Any ideas on what else could be included? Particularly items that could be shop built.
Cheers
Tom
-
18th October 2005 12:50 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
18th October 2005, 07:59 AM #2
Hi Dan & Tom,
Don't forget your bowsaw! If you're planning on working in the bush, make a folding shaving horse (with 2 wheels...now there's an idea!), a brace with bits, and a whittling knife.
Cheers,Andy Mac
Change is inevitable, growth is optional.
-
18th October 2005, 08:10 AM #3
-
18th October 2005, 08:43 AM #4
send me an PM with your eamil address and I will send you some photos of the "total tool kit" used by myself when I did my last wwodworking course at Mittagong (Windsor stool).
Zed
-
18th October 2005, 09:12 AM #5Senior Member
- Join Date
- Nov 2004
- Location
- Holland Park, Brisbane QLD
- Age
- 48
- Posts
- 361
Originally Posted by bitingmidge
Cheers
Tom
-
18th October 2005, 09:15 AM #6
Hi again,
Forgot to mention you'll need a mallet or something to bash your froe with. It will also help knocking joints together. Maybe include a spokeshave for a nice finish.
The whittling knife I mentioned previously is handy to get bark out of forks, places where the drawknife won't get, as well as fine trimming of joints, rounding the end bevels on pins and tenons, as well as sharpening your pencil! Although I have forged some, you can modify kitchen knives to do the same task.. grind them down.
Zed, I look forward to the photo/s of your kit.
Cheers,Andy Mac
Change is inevitable, growth is optional.
-
18th October 2005, 09:31 AM #7
The mallet is called a beetle or beetle maul. If they used a pole lathe for turning, they would often carry the parts of the headstock and the cord as well. The rest would be made on the job.
"I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
18th October 2005, 11:19 AM #8
How about a set of wedges to split logs. And a bullock and a cart to carry it all.
-
18th October 2005, 01:42 PM #9
A round tenon maker.
Forgotton the proper name but looks something like a spokeshave with a blade set into it longways and it works very much like an oversized pencil sharpener (but not pointy)
Hope you make sense of this.
-
18th October 2005, 02:19 PM #10
And a brace and bits.
You also need a spoon bit which is used to bore holes in solid timber seat bottoms to take the leg tenons.
Similar Threads
-
To Dust Collector kit or not, that is the question.
By outback in forum HAND TOOLS - POWEREDReplies: 12Last Post: 2nd September 2005, 01:29 PM -
Planner Attachment Kit Modified
By JimboJoe in forum TRITON / GMCReplies: 4Last Post: 13th November 2004, 05:06 PM -
GMC router kit
By Nic0 in forum ROUTING FORUMReplies: 12Last Post: 2nd November 2004, 01:48 PM