Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 15
Thread: Where can one buy Chisel Handles
-
14th May 2006, 11:09 PM #1.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,813
Where can one buy Chisel Handles
On line, or shops in Perth Metro Area
Thanks
-
14th May 2006 11:09 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
14th May 2006, 11:27 PM #2
I assume you are talking about hand chisels not wood turning chisels.
If you are talking about hand chisels... the best place is from a wood turner who has made the handle to suit the chisel you have a and to suit your hand and preference.
Stick arround someone from the west will no doubt chime in & help you out.
If not post in the turning forum.
If you are talking turning chisels....the answer is.. you don't you lazy bugger... you gaot a lathe dont you.
cheersAny thing with sharp teeth eats meat.
Most powertools have sharp teeth.
People are made of meat.
Abrasives can be just as dangerous as a blade.....and 10 times more painfull.
-
14th May 2006, 11:28 PM #3
Bob -
These are a cool project to do yourself. A simple job on the lathe, or else a good one for a drawknife, a plane and some spokeshaves.
They're really not that hard. My $0.02.
Good luck!
GWWhere you see a tree, I see 3 cubic metres of timber, milled and dressed.
-
15th May 2006, 12:06 AM #4
if you are trying to find the plastic chisel handles the "unbreakable" ones i tried to find them a couple of years ago only to be told they are no longer available due to liability concerns over people not attaching them corrrectly. Sounded crazy at the time but have never found them since
-
15th May 2006, 09:37 AM #5.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,813
Thanks for the responses. The idea of making them does sound like a cool project. My next question then is , can anyone recommend which timber to use?
-
15th May 2006, 10:04 AM #6
What sort of chisels???? Turning chisels? Mortice chisels?? Paring chisels? Carving chisels?...... Are you going to bash the buggery out of 'em with a thumping great mallet?
-
15th May 2006, 12:42 PM #7
Look up "Rehabilitating old chisels" in "best of the best" forum.. Bob Smalser makes two with saw, rasps, files and sandpaper. Beeeeyudiful. Lee Valley sell boxwood jobs for tanged bench chisels. About 12-15 US each though!
The only way to get rid of a [Domino] temptation is to yield to it. Oscar Wilde
.....so go4it people!
-
15th May 2006, 01:31 PM #8.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,813
Originally Posted by Christopha
-
15th May 2006, 01:40 PM #9.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,813
Originally Posted by TassieKiwi
-
15th May 2006, 02:10 PM #10
My immediate reaction is yes, but a finer grained timber like Blackwood may be better. Dunno. I'm going to try Huon.
The only way to get rid of a [Domino] temptation is to yield to it. Oscar Wilde
.....so go4it people!
-
15th May 2006, 06:25 PM #11
tasy oak and huon are probably a bit soft.
spotted gum it the typical tool handle timber of choice in australia.
Its hard, resilient, & springy.
Any thing classed as structural KD hardwood would be fine.
Jarrah you mught get away with but it seems a bit brittle & splintery to me in comparison to spotty gum.
cheersAny thing with sharp teeth eats meat.
Most powertools have sharp teeth.
People are made of meat.
Abrasives can be just as dangerous as a blade.....and 10 times more painfull.
-
15th May 2006, 06:52 PM #12
-
15th May 2006, 07:10 PM #13
I still loves me Euro Beech for chisel handles. Plain, but tough.
GWWhere you see a tree, I see 3 cubic metres of timber, milled and dressed.
-
15th May 2006, 09:13 PM #14
I have used most aussie hardwoods for chisel handles and have not had any problems. Pine is soft and although might still be ok for paring chisels you may find you split the handle when you are trying to attach the blade.
Stick to hardwoods is my advice. Also, if all you are doing is turning chisels a crappy gmc lathe will do the job and is a great deal of fun.
My favourite chisel of all times is a titan chisel that I have turned a custom handle on, theres nothing like turning a handle just the way you like it. The first time you try it it takes a little while (if you have never turned before) but it gets better with practice.
Good luck.
RoutermaniacYou can never have enough planes, that is why Mr Stanley invented the 1/2s
-
15th May 2006, 11:43 PM #15
The nicest wood that I have ever used for handles and small fittings is apple, from any old backyard tree. The yield is small, and there is no figure to speak of, but it is closed grained, works beautifully and wears very well. Its the closest thing (apart from Camelia) to boxwood that I have found.
Greg
Similar Threads
-
Wood Chisel Survey for Beginners
By Bob Smalser in forum HAND TOOLS - UNPOWEREDReplies: 16Last Post: 11th April 2020, 05:03 AM -
Chisel sharpening
By mic-d in forum HINTS & TIPSReplies: 3Last Post: 2nd January 2006, 01:19 PM -
Chisel handles
By kiwioutdoors in forum HAND TOOLS - UNPOWEREDReplies: 5Last Post: 30th November 2005, 06:09 PM -
Weighting Chisel handles?
By smidsy in forum WOODTURNING - GENERALReplies: 7Last Post: 27th August 2004, 09:33 PM -
Advice on Chisel Handles
By GarryO in forum WOODTURNING - GENERALReplies: 11Last Post: 18th April 2004, 01:18 AM