Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: VM100 chuck on a GMC
-
23rd November 2006, 10:44 AM #1
VM100 chuck on a GMC
Hi all,
Well I know the GMC lathe has its limitations- most of them we cant do anything about! But I got a VM100 knock off from H&F and had previously been mounting it in the 4 jaw independant chuck. This was quite cumbersome (and damn near impossible to truly centre it) but I managed to turn a few bowls up to 10" and it handled no probs......
A few people here had said the thread of the GMC was incompatible with any scroll chucks, but i have found Vicmark does an 3/4" 16tpi insert that means now we can mount their chuck properly. (~$30)
Thought this might help a few GMC owners out there unwilling to own up to having such a shameful lathe and chuck options.
This buys us some time untill we all come to our senses and convert it into a disc sander and get an upgrade lathe.
Robert
-
23rd November 2006 10:44 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
23rd November 2006, 10:52 AM #2
excellent! I will tell my......uh.......friend the news. Where would.....uh......he buy one of these inserts?
"Clear, Ease Springs"
www.Stu's Shed.com
-
23rd November 2006, 11:11 AM #3Senior Member
- Join Date
- Aug 2006
- Location
- Kotara
- Age
- 76
- Posts
- 196
Probably not at Bunnies
John H
Why do I never seem to cut "too long"?
-
23rd November 2006, 11:14 AM #4
-
24th November 2006, 09:20 AM #5
Hi Stuart,
Please thank your friend for the original idea of mounting the chuck in the GMC 4 jaw, I had him in mind when i posted this. I got mine from Carbatec Sydney, but like baxter says most Vicmarck stockists should be able to fix you... or your friend up!!
Robert
-
24th November 2006, 09:48 AM #6
Interesting. I've got a Vicmarc 100 chuck on my Record lathe and if memory serves me correctly the adapter was also 3/4" 16 tpi. They're a good bit of kit. Just a shame I can't afford the lathe of the same name. One day...
-
24th November 2006, 11:43 AM #7
-
24th November 2006, 12:51 PM #8
FWIW - You can also get a 3/4 16tpi insert for the Nova chucks.
Growing old is much better than the alternative!
-
24th November 2006, 05:26 PM #9
Robert dont know who told you that you could not get an insert but all the common chucks can be fitted with the 3/4 x16 threaded insert, Vicmarc or Nova.
The chiwanese ones are mostly dedicated threads so do not have the capability of using the insert system.Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
24th November 2006, 10:47 PM #10
Yea, ran a VM100 on my gmc for a couple of years before upgrsding to the leda..
Similar Threads
-
Cleaning/Maintenance of VM100 chuck
By Don Nethercott in forum WOODTURNING - GENERALReplies: 11Last Post: 12th September 2006, 10:17 AM -
GMC Router Table Design Error
By HarryM in forum ROUTING FORUMReplies: 8Last Post: 16th August 2004, 02:22 AM -
Nova Compac chuck
By dawallace45 in forum WOODTURNING - GENERALReplies: 8Last Post: 6th June 2004, 11:28 PM