Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Lathe info wanted
-
30th March 2000, 07:51 AM #1New Member
- Join Date
- Mar 2000
- Location
- vic,australia
- Posts
- 4
Lathe info wanted
Hi. I have been doing some turning at a mates place and would like some information.
What sort of lathe would i need? What tools are available and where can you get them?
Thanks.Munch2.
-
30th March 2000 07:51 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th March 2000, 10:26 AM #2Member
- Join Date
- Oct 1999
- Location
- Bredbo, NSW, Australia
- Posts
- 86
Hey munch
That's a pretty general question. The real answer is, how much are you going to spend? As with most hobbies, you can spend forever. I would suggest you chase up your nearest wood group or club. This site has all sorts of links to clubs and businesses and if you find one in your area, that will be a good starting point. Ask a few questions of people in your area and try and get a peek in a few workshops. I'm sure plenty of people on this BB can throw brand names at you but you need to have a first hand look at the gear and see if it will suit you and your budget. Good Luck
Shaun
-
1st April 2000, 09:53 PM #3New Member
- Join Date
- Mar 2000
- Location
- vic,australia
- Posts
- 4
Thanks for the advice Shaun.
------------------
Munch2.
Munch2.