Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 17
Thread: Avid CNC 4848 pro (4'x4') build
-
31st May 2021, 02:24 PM #1GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,016
Avid CNC 4848 pro (4'x4') build
This thread details the original discussion around the Avid CNC vs Axiom AR4 vs Hammer HNC machines. I thought I'd start a new, clean thread with costs involved, and to document the build.
3 main reasons for choosing the Avid CNC:
- Expandability - the modular construction means I can start small, and add on at will. I originally planned on getting the 2x4', but decided on the 4x4' when I thought about shipping etc.
- Format - the other machines I was considering were narrow and long, whereas the Avid 2x4 was wide and short - so better suited to my space.
- Price. By the time you spec the Hammer (usual Felder story - the price you see is not the price you pay!) and Axiom up, the Avid wasn't a huge amount more. Having said that, if it wasn't for the COVID-inspired tax incentives, I'd never have even considered these machines.
I mess about with sheet goods a lot, so it was important that the work area could deal with reasonable fraction of a sheet - 1/4 or 1/2 or full. Then it's not too difficult to tile/index the sheet for the job.
The machine finally arrived last week. Avid quote around 12 weeks from payment to shipping. This was about correct. Shipping then took another two months, thanks to COVID and some bugger parking a dirty great ship across the Suez canal. It came by UPS Ocean service, and would have arrived a week earlier if I didn't live in the extreme rural town of Newcastle. UPS will deliver directly to metropolitan areas. Anything else gets transferred to Toll.
Shipping weight was 323kg. Great service from Toll - UPS never sent me any tracking info for the final leg of the journey, so the Toll man turned up at my door with a 300kg pallet, and nobody home to receive it. He unpacked the whole pallet and lugged the boxes up the stairs to put them behind my deck screening. Then the missus moved them into the garage when she got home as I was fortuitously working late .
It's a lot of boxes:
boxes of CNC.jpg
Costs:
Add up the cost of the machine and extras - all on the Avid Website.
Convert to USD, and wire the $ to Avid. They take the cash up front - not when they ship.
Shipping was just shy of US$1500. ie about as much as a hobby CNC will cost you here! I think COVID has impacted this hugely - getting anything from the US now costs an arm and a leg. Or several in this case.
When the machine lands here, you will need to pay:
GST on (the original purchase + shipping). Note that the AU$ value is calculated when the goods land in Aus - not when you bought it. In may case, the AUD had strengthened a fair amount, so I paid less GST this way.
I was NOT charged any duty - I can't guarantee that this would be the case for anyone else, but it looks like the US-AU free trade agreement came into play.
However, it still had to go through customs, which means I had to pay UPS (as customs agent) + import declaration fee + quarantine fee + disbursements (whatever that is) + GST on that little lot. Just short of AU$400. I expect this would be relatively fixed, so if you could find a busload of people and brought in a container full of CNC's, it'd still be $400.
Avid have been excellent. Set up a video call after some initial email to-and-fro when I was thinking of the machine, and were very helpful throughout the process. A few of the boxes arrived damaged - looks like it's cosmetic, but I emailed Avid to let them know as it'll be a while before I can check everything. 'No problem - just let us know if anything's damaged and we'll priority ship it to you. It's all covered under shipping warranty'. They appear pretty customer focussed.
I spent the weekend cleaning up the workshop and clearing space for the build. Final footprint is around 1700mmx1700mm as the electronic boxes set on the outside of the frame. I'll put pictures up as I go along.
-
31st May 2021 02:24 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st June 2021, 10:08 AM #2Senior Member
- Join Date
- May 2019
- Location
- Sydney
- Age
- 45
- Posts
- 216
Looking forward to it, step up from the machine I have
-
13th June 2021, 10:36 AM #3SENIOR MEMBER
- Join Date
- Sep 2009
- Location
- Newcastle
- Posts
- 549
How is the build going?
Space permitting it is totally worth having a machine that can handle reasonable sheet sizes. Mine takes quarter sheet (1200x600) and I wish I'd made a half sheet machine.
Unless doing production work, I don't think stepping up from half sheet to full sheet is worthwhile for most (unless you have no space constraints).
-
14th June 2021, 11:10 AM #4GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 1,784
Is it going yet?
I have a few “samples” we can test it out on.
-
14th June 2021, 01:20 PM #5GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,016
It's almost done. I've got a ream of timelapse video of the build, which I'll get around to stringing together sometime.
Around 25-30hours to get it together I reckon, mostly an hour or two snatched in evenings, so not the most efficient way to do it.
I'm having some trouble with the spindle electronics - I'm sure Avid's site said it wanted 18A, but it came witha a yank 30A NEMA L6-30P plug, and the VFD documentation says it wants 24A, and may draw a 'significant' amount of juice on startup. Not sure whether this is the problem, but it trips my 40A RCD if I try to power it up. Sparky mate is coming around next week to have a look for me.
The other electronics box is fine, so it goes left/right/back/forward and up and down without any problem. It just can't cut anything :/
The other thing I didn't think through was sorting out vertical workholding. The machine is modular, so it's not hard to do - I just need 2 extra pieces of 80/40 aluminium extrusion. But it's not worth getting them from Avid, so I need to find something local that will take compatible fastners.
-
14th June 2021, 06:38 PM #6Woodworking mechanic
- Join Date
- Jan 2014
- Location
- Sydney Upper North Shore
- Posts
- 4,470
Did you buy the spindle listed on their site?
-
14th June 2021, 09:37 PM #7GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,016
-
22nd June 2021, 10:43 AM #8GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,016
So, a stroke of luck: While browsing the internets for Aus aluminium extrusion, I recognised the packaging in a catalogue as being the same as some of the boxes the CNC bits arrived in. Turns out we have a branch of 80/20 here in Sraya, and strewth Bruce, they can supply the same profile, cut and bored to spec.
They're more expensive than Avid's prices, at least for the fasteners, until you factor in paying UPS to bring the stuff to Aus. For example, Avid will sell you extra drop-in T-nuts for 70 US cents. Here, they're AU$3.50.
The 40-80 UL 1440mm piece cost me just over $100, and the 1250mm piece was around $90. Cuts and bores cost extra ($2.50 and 3.50ea respectively).
Nice to know that I'll have options for future expansion. Avid supply gear track and linear rails in thick cardboard cylinders, so I expect it'll be a fair bit cheaper to get those bits from the US, and source the extrusion here, rather than get a whole pallet of parts again.
-
22nd July 2021, 08:29 AM #9GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,016
Well, it turns out you can build one of these in about 15 minutes. Which is nice.
-
19th September 2021, 04:51 PM #10Senior Member
- Join Date
- Jul 2019
- Location
- Box Hill
- Age
- 66
- Posts
- 186
How did you go with the current draw on start up for the 3hp spindle? Looking great by the way..
-
19th September 2021, 07:49 PM #11Member
- Join Date
- Apr 2013
- Location
- Mornington Peninsula
- Posts
- 70
Great video. I really like the look of the Avid cnc, but a bit hard to justify since I really have no need for one! Yet.
Sent from my iPad using Tapatalk
-
19th September 2021, 07:50 PM #12GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,016
All sorted. I'm not sure what the sparky did, but it's working. Oddly, we also had to have the spindle plugged in to the VFD controller before switching on - we were trying to troubleshoot with just the VFD but it popped the breaker every time. Once the spindle was plugged in, it all worked after the sparky tinkering.
- - - Updated - - -
It's a great machine, and the software works well too.
-
23rd November 2021, 02:30 PM #13
Hey Bernmc,
do you know of anyone in Sydney that has an Avid CNC? I'm currently investigating the labyrinth that is the build/buy CNC router dilemma, and keep finding good info on Avid CNC's.
I'd love to see one in the flesh and/or chat to someone who's got one, to see if they are better than what I build/source.
I'd be keen on your feedback, and if you found anyone local that may have one I can go and bend their ear for a bit.
TN.
-
23rd November 2021, 10:21 PM #14SENIOR MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Posts
- 651
Wondering how flat and true the 80/20 extrusion is? I imagine would have to be pretty good and was thinking would make a good fence for table saw.
-
24th November 2021, 07:02 AM #15GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,016
I'm in Newcastle, so don't know of anyone in Sydney with one. Happy to chat about mine/show it off.
Avid quote pretty decent tolerances for their machines, so the extrusions must be flat and true to get them
Similar Threads
-
Outdoor Table Build - full build photos
By pach in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 6Last Post: 25th March 2019, 05:18 PM -
Plan the build / Build the plan. Verandah steps & Trim
By Charlee43 in forum WOODWORK PICSReplies: 4Last Post: 22nd March 2014, 07:28 PM -
Patio build - Hardwood and softwood in the same build?
By gidgegary in forum WOODWORK - GENERALReplies: 1Last Post: 16th January 2014, 09:00 PM -
help me build a basic flat build bed trailer for my kayaks
By gros21 in forum TRAILERS & OTHER FABRICATED STUFFReplies: 7Last Post: 13th October 2011, 08:47 AM -
Trailer - to build or not to build
By motegi in forum TRAILERS & OTHER FABRICATED STUFFReplies: 17Last Post: 6th May 2009, 03:07 PM