Thread: who in Auz sells Jointer/thicknesser blades.

If you get stuck give this business a call he's in bundaberg ,could be too far away from you ,ACE GRINDING & SAW SERVICE,5 MASSEY STREET,BUNDABERG 4670.

PH 41512751.

PS ask for tony.

There is a company call W. H. Blakely who sharpen our guillotine knives at work. They have done some 8" jointer knives for me and did a great job.

I spoke to a rep at a printing trade show, and they can make knives to spec, so they may be work trying.

http://www.blakeley.com.au/whb_home.html

Regards, Geoff

Here's another recent thread on the same topic

Any sharpening service would have them as a stock item

Originally Posted by rrobor

Im searching for a blade/knife supplier. I have a 6" jointer of Tiawan origin which was sold under various brands. I can get the knives sharpened at $9 per blade but would prefer a spare set. Also my thicknesser a 12" job has done a bit and red gum aint that soft. Would love a Victorian supplier but any Aus would be fine.

australian saws & blades
Unit 2/93 research road pooraka
SA 5095 ph 83497677

Have used this guy for years and he is very good,. Not quite in your area but he has made plenty of blades for me when I have needed them . His names steven rose and very trustworthy if you cant find someone closer. Also not to dear with his pricing , cheers mick

I ordered a 6" 18% tungsten set from Carbatec (Syd) last Wednesday about 4.00pm and had them in my workshop in Newcastle on Friday at 9.00am $50. I took my old ones out and dressed them with a diamond stone and tucked them away for next changeover. If you change them over as soon as they start to dull it's just a quick lap with the diamond stone.