Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 14 of 14
Thread: Bandsaw blade guides
-
1st August 2012, 10:05 AM #1
Bandsaw blade guides
Does anyone know the website of the bloke who sells bandsaw blade guides at the Sydney wood show? He was right next to Trend Timbers. Thanks.
Visit my website at www.myFineWoodWork.com
-
1st August 2012 10:05 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
1st August 2012, 10:14 AM #2Novice
- Join Date
- Aug 2008
- Location
- sydney
- Posts
- 10
the reindeer man
that would be Carter Products
sounds like the guides etc will be stocked at Trend
he certainly made that bandsaw sing - a good show
-
1st August 2012, 10:40 AM #3
The Blade Guides.
HI Wongo,
I have never bought Guides for my 14in. Saw.
You make them yourself from Lignum Vitae ? or Red Gum, etc & they work as good as anything you can buy.
You just keep turning them around.
You could soak them in some oil.Regards,
issatree.
Have Lathe, Wood Travel.
-
1st August 2012, 11:44 AM #4
I did the same with my old saw. I used jarrah. They worked better than the metal block guides and the saw ran quieter
Regards
John
-
1st August 2012, 11:59 AM #5
Trend are the NSW agents and we will be the victoian agents.
The make any bandsaw into a rolls royce.
The sherwood bandsaw they had there had never cut so good.
The noise from the bearing was also very minimal and the stup was brilliant.Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
1st August 2012, 12:26 PM #6
-
1st August 2012, 02:36 PM #7
Found it - Band Saw Products by Carter Products
Opps - Sorry just re-read what you wrote Wongo; you were asking for the info on the Carrol's website....
-
1st August 2012, 02:43 PM #8
I was very impressed with the Stabiliser like this one. I am trying to figure out if it fits my CT 17"
Grizzly 16" by Carter ProductsVisit my website at www.myFineWoodWork.com
-
2nd August 2012, 09:51 PM #9New Member
- Join Date
- Jul 2012
- Location
- Perth
- Posts
- 1
The website is Benchmark Quality Tools for Carter Products in Australia & New Zealand, and we can help with any enquiries. We are currently exhibiting at the Perth Wood Show, so I hope you can excuse a slight delay in any replies.
We pretty much sold out of all the Stabilizer's in Sydney, and have only just today received our next shipment. Carroll's and Trend should have stocks early next week.
If you have a band saw and aren't sure of whether or not we can fit suitable guides, please contact us and we can make sure you get the right fit.
Thanks for all the support at the show. Alex Snograss in particular felt a bit like a rock star!
Stephen
-
3rd August 2012, 08:00 PM #10New Member
- Join Date
- Jul 2012
- Location
- Lockwood South
- Age
- 75
- Posts
- 3
Band Saw Blades
It is Carter Products Company e-mail Band saw blades, wheels, guides, and parts from Carter Products
I have there spec's on the blade guides if you want them?
Richo
-
7th August 2012, 03:17 AM #11
I got to Bandsaw parts; Band Saw Parts for Marvel, Doall, Hydmech and Hem Band saws; We specialize in Marvel 8 Bandsaws for replacement band saw parts. They cater guides for different brands.
-
10th August 2012, 08:47 AM #12
It was a very impressive demo at the show.
I grabbed the Benchmark list from Rockstar Alex.
I'll get a set for my bandsaw when I get power to the new shed.
I know where Trend are!Scally
__________________________________________
The ark was built by an amateur
the titanic was built by professionals
-
10th August 2012, 09:57 AM #13
Just started to load up on the web site. Carter Bandsaw Accessories
Give me a week or so to get the rest of the info up there.
We have had confirmation from Stephen that he will be part of our stand at the Melbourne Timber and Working with Wood Show on October 19-21 so come along and see what the fuss is all about.Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
10th August 2012, 10:53 PM #14
Trend Timbers has stocks of the Carter Products
Was at Trend on Wednesday - have quite a few Carter Products boxes in the showroom.
Give Adrian a call - I am sure he can help.
I managed to get "Big Al" to make me a couple of reindeer to bring home!
Even managed to video him making one.
Gave him one of my "see through" turned bowls to take home (it was his birthday on the saturday of the show).Artisans On The Hilll - Gallery, Manning Valley Hideaway Accommodation & Workshops.
Ideal Family or Group Getaway!
You all come & visit now - y'hear!
http://www.artisansonthehill.com.au
Similar Threads
-
bandsaw blade guides
By wok20 in forum BANDSAWN BOXESReplies: 2Last Post: 18th April 2012, 05:38 AM -
Bandsaw Blade Guides
By Scott in forum WOODWORK - GENERALReplies: 7Last Post: 31st December 2011, 07:55 AM -
Deluxe Blade Guides
By funkychicken in forum BANDSAWSReplies: 27Last Post: 30th November 2008, 11:53 PM -
blade guides
By penguin in forum BANDSAWSReplies: 4Last Post: 22nd September 2006, 11:06 PM -
Blade Guides
By zathras in forum BANDSAWSReplies: 4Last Post: 24th August 2002, 10:19 AM