Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Edgebander Help
-
27th October 2008, 10:03 PM #1New Member
- Join Date
- Oct 2008
- Location
- Bundoora
- Age
- 39
- Posts
- 6
Edgebander Help
Hey all, my mate is looking to buy an edgebander to go with the saw he bought at the Melbourne wood Show on the weekend. He wants an edgebander that does at least 1mm ABS, and would be a bonus to get one that does 2mm. Preferably hot melt rather than preglued because we're not sure if you can get all the same colours in preglued. Wants top/bottom round trimmers, and end trimmers.
He only wants to spend around 6k, is there anything out there around this price or should he be looking at second hand machines.
Also if anyone can recommend a new machine at around 10k that would be appreciated.
-
27th October 2008 10:03 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
27th October 2008, 10:46 PM #2
-
27th October 2008, 11:36 PM #3
You can get all colours in the Formica, Laminex, Verve and Colourpyne ranges in pre-glued. Not sure about the others, but I'd be suprised if you couldn't. The lead time is a bit longer, but all the colours should be available. Even brand new and spending four times as much as your mate wants to will mean lots of adjusting and swearing. Edgebanders are complicated machines with lots of different functions and components. It helps if you have mechanical aptitude.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
28th October 2008, 09:05 PM #4New Member
- Join Date
- Oct 2008
- Location
- Bundoora
- Age
- 39
- Posts
- 6
Yeah i want him to buy a new one, there is one machine, the Band-it EB350, that we were talking to the guys at the wood show about, fo just over 12k, does anyone have one or have used one. Any other recommendations would be appreciated.
Similar Threads
-
Edgebander Glue
By robertad in forum GLUEReplies: 3Last Post: 8th May 2008, 09:52 PM -
Wiring in the edgebander
By Rossluck in forum HAND TOOLS - POWEREDReplies: 5Last Post: 20th March 2007, 09:04 PM -
Edgebander
By Rossluck in forum HAND TOOLS - POWEREDReplies: 5Last Post: 9th March 2007, 10:06 AM -
Edgebander
By Niccon in forum HAND TOOLS - POWEREDReplies: 1Last Post: 29th July 2005, 12:18 AM