Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: How to do this? (see picture)
-
20th July 2010, 04:10 PM #1New Member
- Join Date
- Mar 2010
- Location
- Melbourne
- Posts
- 2
How to do this? (see picture)
Hi everyone.
I'd like to know how the circular indent where the girl has her head has been made.
Would a coarse sanding disc do the job?
Thanks!!!
-
20th July 2010 04:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
20th July 2010, 09:23 PM #2
I'd be routing it out in sections then flat chisel to knock out what was missed routing, then orbital sanding. But I think you are in the wrong section of the woodwork forum.
-
20th July 2010, 09:32 PM #3
Isn't it a big hole with another layer of wood glued under the hole?
It is the wrong section.Back To Car Building & All The Sawdust.
-
20th July 2010, 10:16 PM #4
Looks like it slopes down toward the hole at the top of the table. Maybe a router on a trammel(?) arm, coming off a sloping ramp which starts at the diameter and slopes up at the same angle up under where her shoulders are. Easier to picture than describe.
-
21st July 2010, 11:48 AM #5New Member
- Join Date
- Mar 2010
- Location
- Melbourne
- Posts
- 2
Thanks so much guys!
Hey what do you mean wrong section?
-
21st July 2010, 09:18 PM #6
It looks like one piece of board that has been laminated together and then the circular indent has been cut away as the grain seems to follow all the way through the indent right to the outer edges of each laminated piece.
SBPower corrupts, absolute power means we can run a hell of alot of power tools
-
21st July 2010, 09:27 PM #7Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
What he said. Routed with an angle board,
Similar Threads
-
Picture Frame
By CPD in forum WOODWORK - GENERALReplies: 1Last Post: 24th February 2009, 04:03 PM -
first picture, saw
By Stringy in forum WOODWORK PICSReplies: 10Last Post: 3rd September 2006, 12:05 PM -
How can I fix this VCR? Getting a bad picture
By JDarvall in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 43Last Post: 3rd May 2006, 02:23 PM -
picture frames
By jow104 in forum WOODWORK PICSReplies: 7Last Post: 16th April 2006, 06:17 PM -
Picture for Ryan
By silentC in forum ROGUES GALLERYReplies: 14Last Post: 27th January 2006, 07:57 AM